4HF614400Z4AACTGI

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	--
Package / Case:	--
Mounting Type:	--
Ratings:	--
Current - Supply (Max):	--
Operating Temperature:	-40°C ~ 85°C
Series:	4HF
Voltage - Supply:	3.3V
Output:	LVDS
Function:	Enable/Disable
Frequency:	614.4MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Obsolete
Packaging:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of 4HF614400Z4AACTGI Oscillators

The 4HF614400Z4AACTGI is a type of oscillator, which is commonly used for different applications. An oscillator is an electronic circuit used to produce a continuous or periodic signal. This signal can be used to perform various tasks such as generating an AC voltage from a DC voltage, providing a reference signal for a measuring instrument or providing an alternating signal to produce a sine wave, triangle wave or square wave.

Applications of 4HF614400Z4AACTGI Oscillators

The 4HF614400Z4AACTGI is typically used in applications that require an accurate and reliable signal source. These applications include television receivers, radio receivers, communication systems, control systems, navigation systems, computers, instrumentation, process control, motor speed control, high precision frequency measurements, and clock and timing circuits.For example, a television receiver uses oscillators to generate the sound and picture information that is transmitted over the airwaves. In communication systems, oscillators are used to generate radio waves that are used for voice and data transmissions. In control systems, oscillators are used to keep components synchronized and to ensure accurate timing of operations.

Working Principle of 4HF614400Z4AACTGI Oscillators

The working principle of 4HF614400Z4AACTGI oscillators is based on the fact that a circuit with an oscillator can be made to “oscillate” — produce a periodic output — when feedbacks are applied to it. An oscillator circuit is composed of an electrical or electronic component that oscillates between two states, such as between an open and a closed circuit, or between a high and a low voltage level. The 4HF614400Z4AACTGI oscillator consists of four components: a resistor, a capacitor, an oscillator and a timer. The timer provides the timing signal for the oscillator to oscillate. It works by alternating high and low voltages. The resistor and the capacitor regulate the frequency of the oscillator by either increasing or decreasing the amount of voltage fed back to the system. The 4HF614400Z4AACTGI oscillator can be used to generate a wide range of signals, from simple sine waves to complex modulated waveforms. This makes it ideal for use in applications that require different types of signals and frequencies. However, it is most commonly used to generate a low frequency (50 Hz to 10 kHz) signal for use in timekeeping devices such as watches and clocks.

Conclusion

The 4HF614400Z4AACTGI is a type of oscillator that is used in a wide range of applications. It is most commonly used for timekeeping devices, but it can also be used for television receivers, radio receivers, communication systems, control systems, and many other types of systems that require an accurate, reliable signal source. It works on the principle of providing feedback that causes the oscillator to alternate between two states or signal levels, producing a low frequency signal.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description