4MA148500Z3BACUGI

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	95mA (Typ)
Operating Temperature:	-40°C ~ 85°C
Series:	4MA
Voltage - Supply:	2.5V
Output:	LVPECL
Function:	Enable/Disable
Frequency:	148.5MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Obsolete
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are devices used to generate electrical signals at a power frequency. The frequency of the signal depends on the characteristics of the oscillator circuit design. In general, oscillators are characterized by a sinusoidal output signal with a minimum amount of distortion.Oscillators are used in a wide variety of applications, including detection, communications, test and measurement, microwave frequency control, power supplies, and clock and data applications. A few examples are voltage-controlled oscillators (VCOs), crystal oscillators, phase-locked loops (PLLs), sinusoid generator (SG) and sweep generator.The 4MA148500Z3BACUGI is an oscillator developed by Crane Aerospace & Electronics for reliable solutions, fast delivery, superior technical support and precise measurement in various industrial applications. It is a crystal oscillator with accurate frequency control through the use of a quartz crystal resonator or a dielectric resonator oscillator. It has an output frequency range of 28MHz to 400MHz, with the ability to switch between frequencies (frequency hop) up to 1.5MHz apart.The 4MA148500Z3BACUGI is mainly used in the space industry where environmental temperature and humidity can vary drastically. Its components are smaller than other oscillators, which helps to reduce size and weight. It additionally guarantees a very narrow frequency tolerance range, with a temperature coefficient of up to +/-20 ppm/°C, making it suitable for use in extreme conditions.The working principle of the 4MA148500Z3BACUGI is based on the resonance of a quartz crystal or dielectric resonator and an electrical circuit. A quartz crystal or dielectric resonator is placed in an electrical circuit, which is used to generate a series of oscillations, which are of a precision frequency and stability. This frequency is controlled by the oscillator, which can vary the frequency up to 1.5MHz apart.The oscillator is constructed using transistors or integrated circuits, and the same resonator is used with other components including capacitors, inductors, resistors, and buffers. These components are used to tune the oscillator\'s frequency accurately and reduce its short-term frequency drift. The output frequency is checked against a time-based reference such as an atomic clock or GPS signal to ensure accuracy.In conclusion, the 4MA148500Z3BACUGI is an accurate and reliable oscillator used in a variety of applications. Its working principle is based on the resonance of a quartz crystal or dielectric resonator and an electrical circuit, allowing for precise frequency control and timing. It is a cost-effective solution with a robust construction that allows for use in extreme temperature and humidity conditions.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description