4MA160000Z4AACTGI

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	--
Operating Temperature:	-40°C ~ 85°C
Series:	4MA
Voltage - Supply:	3.3V
Output:	LVDS
Function:	Enable/Disable
Frequency:	160MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Obsolete
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: 4MA160000Z4AACTGI Application Field and Working Principle

The 4MA160000Z4AACTGI is a Silicon-based oscillator from Spark Fun Electronics. It is used in a variety of applications including power supplies, time keeping, telecommunications, electrical motor control, automotive, and many other applications.The 4MA160000Z4AACTGI oscillator is used to generate an exact frequency signal in order to maintain accurate timing for a circuit. It creates a signal at a set frequency and repeats this signal in a periodic manner, making it suitable for many applications where precise timing is required.The 4MA160000Z4AACTGI oscillator is designed with a maximum frequency of 200KHz. It has a highly accurate tracking error of 4ppm over any temperature range, making it very reliable for precision timing applications.The oscillator consists of a capacitor, two resistors, and a two JFETs (Junction Field Effect Transistors) as its base components. The JFETs act as threshold devices which can be set to switch between two states. One state is for low frequency, while the other is for high frequencies. The resistors are used to set up the voltage levels of the oscillator, while the capacitor is used to store energy for the oscillator.The 4MA160000Z4AACTGI oscillator utilizes an integrated circuit and is connected to a power supply which is used to supply the necessary voltage and current to the IC. The oscillator is then connected to the circuit which it is intended to drive. A voltage regulator is used to ensure the IC has a steady voltage level to ensure a consistent output.Once the voltage regulator is connected, the oscillator can be tuned to the desired frequency. This is done by changing the values of the resistor and capacitor to set the frequency range. The output frequency is then controlled by altering the bias voltage applied to the JFETs.The 4MA160000Z4AACTGI oscillator is known for its accuracy and is very reliable for precision timing requirements. It is also easy to configure and does not require any special tools or equipment to operate. This makes it ideal for applications that require precise timing and accuracy.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description