4N48

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are optoelectronic devices used to provide electrical isolation between two circuits. A typical optoisolator consists of an input, an output, and a light-emitting diode (LED) or other optical source. The input is usually an electrical signal, and the output is usually a transistor, photovoltaic, or other device that is electrically isolated from the input. The LED is activated when the input circuit has a voltage across it, and the output circuit is energized in response to the light from the LED.

A 4N48 optoisolator is a four-pin optoisolator that is used in a wide variety of applications. The 4N48 optoisolator is a low-cost device with a minimum distance between the input and output pins. The 4N48 is typically used to isolate digital circuits from input signals, such as switches, sensors, and other devices. It is especially useful in industrial applications, and is often used to protect sensitive circuits from interference and EMI.

The 4N48 optoisolator has a transistor output. The transistor output can be used for switching loads up to 1A, and can be powered by either AC or DC. The device is typically controlled by a low-voltage input signal, and the output voltage is typically 30V or less. The 4N48 is also capable of providing frequency-dependent gain, and thus is well-suited for use in electronic equipment and motor controls. The 4N48 is a versatile optoisolator that can be used in a variety of applications.

The working principle of the 4N48 optoisolator is based on the use of light to provide electrical isolation between two circuits. The 4N48 consists of an LED and a photodiode. When a voltage is applied to the LED, it emits light, which is then detected by the photodiode. This causes the photodiode to generate a small current, which is then used to activate the output transistor. When the output transistor is activated, it allows current to flow through the load, thus providing electrical isolation between the input and the output.

The 4N48 optoisolator is an inexpensive, all-in-one device that can be used in a variety of applications. It is especially useful in EMI-sensitive applications, such as industrial control, computers, and test equipment. It is also commonly used for switching and isolating signal lines in digital circuits, such as logic gates. Additionally, the 4N48 optoisolator is capable of providing frequency-dependent gain, making it an ideal choice for applications such as motor drives and amplifiers.

The specific data is subject to PDF, and the above content is for reference