Allicdata Part #: | 4R97ABH1K01179-ND |
Manufacturer Part#: |
4R97ABH1K01179 |
Price: | $ 9.30 |
Product Category: | RF/IF and RFID |
Manufacturer: | Laird Technologies EMI |
Short Description: | GK NICU NRS PU V0 CST |
More Detail: | N/A |
DataSheet: | 4R97ABH1K01179 Datasheet/PDF |
Quantity: | 1000 |
29 +: | $ 8.44963 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Radio Frequency Interference (RFI) and ElectroMagnetic Interference (EMI) have become an important concern in the electronics industry, as new forms of communication and data transmission have become more common. Many engineers are now integrating these two technologies into their designs to reduce the impact of interference. One of the most popular methods for reducing RFI and EMI is to introduce contact, fingerstock, and gasket materials. The 4R97ABH1K01179 is one such product that has been specifically designed to provide maximum RFI and EMI suppression.
4R97ABH1K01179 is a fingerstock material consisting of several layers of woven carbon steel. This material has a high initial resistance (IR) of up to 1.00 to 10.0 ohms for better shielding from electromagnetic interference. This material also has a shielding effectiveness (SE) of up to 60 to 90 dB. Additionally, this material\'s resistance to fire, water, radiation, and weathering means that it can withstand harsh environmental conditions. The material has been used in a variety of applications, from industrial to medical, where environmental protection is required.
One of the main advantages of the 4R97ABH1K01179 is that it allows for a variety of contact configurations, including snap-in, wrap-around, pass-through, and surface mounts. This is an important factor in many applications, as it allows the material to be used in complex contact designs. Additionally, it is a soft material, making it less likely to damage components or wear out contact points. The material has also been designed to provide a tight contact force while maintaining a low-noise contact for optimal signal integrity.
The 4R97ABH1K01179 is also easy to install and configure. The material is designed to be flexible and adjustable, making it easier to fit into non-standard, small, and inaccessible areas. Additionally, it requires virtually no maintenance or service. Its durability and robustness, combined with its low weight, make it an ideal choice for many electronic applications.
Its ability to reduce RFI and EMI makes the 4R97ABH1K01179 a popular choice for many applications. As the material is designed to provide a high level of shielding, it is often used in military applications and medical devices, which require a high degree of signal integrity and noise prevention. Additionally, it is often used in consumer applications, such as mobile phones and laptops, to reduce the amount of interference that is generated from the device.
The 4R97ABH1K01179 is an effective solution for preserving signal integrity and protecting against RFI and EMI in electronics applications. With its low cost and low maintenance, it is quickly becoming the material of choice for many engineers. The material\'s ability to provide a tight contact force while preventing electromagnetic interference makes it an ideal choice for many commercial and industrial applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
4R97ABH1K00443 | Laird Techno... | 1.9 $ | 1000 | GK NICU NRS PU V0 BELL |
4R97ABH1K01445 | Laird Techno... | 5.45 $ | 1000 | GK NICU NRS PU V0 BELL |
4R97ABH1K01179 | Laird Techno... | 9.3 $ | 1000 | GK NICU NRS PU V0 CST |
GK NICU PTAFG PU V0 DSH
NOSG,STR,SNB,PSA
CLO,STR,ZNY,DLN
GK NICU NRSG PU V0 SQ
MILCONNECTOR,ECE050 1.50X1.75X1.
GK SNCU NRS PU V0 JSH