Allicdata Part #: | 3M11207-ND |
Manufacturer Part#: |
5-1120-1 |
Price: | $ 6.59 |
Product Category: | RF/IF and RFID |
Manufacturer: | 3M (TC) |
Short Description: | TAPE ALUM FOIL 25.4MM CIRC 5/PK |
More Detail: | N/A |
DataSheet: | 5-1120-1 Datasheet/PDF |
Quantity: | 1000 |
5 +: | $ 5.98500 |
Series: | 1120 |
Part Status: | Active |
Type: | Shielding Sheet |
Shape: | Circular |
Length: | -- |
Width: | 1.000" (25.40mm) |
Thickness - Overall: | 0.004" (0.10mm) |
Operating Temperature: | -- |
Adhesive: | Conductive, Single Sided |
Material: | Aluminum Foil |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Radio Frequency Interference (RFI) and Electromagnetic Interference (EMI) affect the performance of electronic equipment. Not only does RFI/EMI interfere with electronic signals, but it can also cause serious health risks if not effectively shielded. Shielding and absorbing materials are used to prevent and reduce the effects of these interferences. One such type of shielding material is 5-1120-1.
5-1120-1 Application Fields and Working Principle
The ability of 5-1120-1 to shield electromagnetic and radio frequencies is based on the physical property of this material, which is the dielectric constant. The dielectric constant is the ratio of the electrical energy stored in a material to the electrical energy stored in a vacuum. Materials with high dielectric constants (i.e., those considered “good” insulators) are capable of stopping the flow of electricity. 5-1120-1 is made of a combination of aluminum and silicon, which makes it one of the most effective materials available for shielding electromagnetic and radio frequencies.
5-1120-1 can be used in a variety of applications, such as shielding generators, communications systems, and other electronic equipment from RFI and EMI. In addition, this material can also be used to reduce the interference from other electronic equipment and signal noise in industrial, medical, and military settings. 5-1120-1 is also widely used in civil aviation, marine industries, and consumer electronics.
In order for 5-1120-1 to be effective in shielding RFI and EMI, the material must be able to absorb energy at the frequencies being shielded. When the material absorbs this energy, it produces heat, which is then dissipated into the surrounding air. The material will also begin to act like a filter, trapping and reflecting the radiation instead of allowing it to pass through the material.
The physical makeup of 5-1120-1 also contributes to its efficacy in shielding RFI and EMI. The material is composed of granular particles of aluminum and silicon powder that are mixed with heat-resistant binders. The combination of these materials creates a material with a high dielectric constant, ensuring that the material can absorb and shield a broad range of frequencies effectively.
Another advantage of 5-1120-1 is that it is easy to install and can be quickly applied to a surface, making it ideal for a variety of industrial, military, and consumer electronics applications that require the shielding of equipment from potentially damaging RFI and EMI signals.
In conclusion, 5-1120-1 is an effective material for shielding RFI and EMI in a variety of applications. This material is composed of aluminum and silicon powder, which make it highly effective in absorbing waves of different frequencies. 5-1120-1 is easy to install and can be quickly applied to surfaces, making it ideal for industrial, military, and consumer electronics applications. The combination of its physical properties and ease of application make 5-1120-1 an ideal choice for shielding electronic equipment from damaging RFI and EMI.
The specific data is subject to PDF, and the above content is for reference
TAPE POLYMER RESIN 12.7MM 5/PK
SHEET PLYMR RESIN 25.4MM SQ 5/PK
SHEET FABRIC 19.1X101.6MM 100/PK
TAPE FABRIC COPPER 100/PK
FLEX SUPPRESSOR / NOISE SUPPRESS
MF500-117 .625X12X12 ECCOSORB