Allicdata Part #: | 3M11344-ND |
Manufacturer Part#: |
5-1125-2 |
Price: | $ 7.36 |
Product Category: | RF/IF and RFID |
Manufacturer: | 3M (TC) |
Short Description: | TAPE COPPER FOIL 50.8MM 5/PK |
More Detail: | N/A |
DataSheet: | 5-1125-2 Datasheet/PDF |
Quantity: | 1000 |
5 +: | $ 6.69438 |
Series: | 1125 |
Part Status: | Active |
Type: | Shielding Sheet |
Shape: | Circular |
Length: | -- |
Width: | 2.000" (50.80mm) |
Thickness - Overall: | 0.004" (0.09mm) |
Operating Temperature: | -- |
Adhesive: | Non-Conductive, Single Sided |
Material: | Copper Foil |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Today, the need for shielding and absorbing materials to reduce RFI and EMI continues to increase in nearly all applications. This is because most electronic devices require some degree of electrostatic shielding or absorbing material in order to maintain integrity and protect against interference. Even though shielding and absorbing materials are commonly used in electronic applications, they also have a wide range of other applications.
RFI and EMI that are present in any electronic device can cause the device to become unstable and cause interference. In order to mitigate the potential interference these nuisances can cause, manufacturers use 5-1125-2 application field and working principle shielding and absorbing materials. This type of material is specifically designed to absorb and reflect the radio frequency energy present in the device or system. By absorbing the high-frequency energy, the device or system becomes more reliable and can operate at peak performance.
The reflection and absorption of high-frequency energy is achieved through a variety of processes. Initially, the material acts like an antenna, receiving and reflecting the high-frequency radiation. This reflection reduces the amount of radiation that can reach the inside of the device, which in turn reduces the interference. Additionally, the material can absorb some of the energy and turn it into heat, further reducing the amount of interference.
Another common use of 5-1125-2 application field and working principle shielding and absorbing material is in the protection of personnel from electromagnetic fields (EMF). This type of shielding and absorbing material can be used in areas where personnel are exposed to high levels of EMF, such as in MRI suites. The material is effective at capturing and dissipating the EMF so that personnel are protected from the radiation. This type of shielding and absorbing material is also used in areas where personnel may be exposed to electromagnetic pulses (EMP).
In addition to protection from RFI and EMI, 5-1125-2 application field and working principle shielding and absorbing material is also commonly used in construction applications. This type of material can be used to provide a soundproof barrier between an outside structure and the interior of a building. This material can also be used to line walls and floors to provide additional insulation and reduce noise transmission. Additionally, the material can be used to coat appliances, piping, and air conditioning units to reduce the amount of noise they generate.
The 5-1125-2 application field and working principle shielding and absorbing materials have many uses and are essential for the protection of personnel, devices, and structures from RFI and EMI. This type of material is also useful in construction and insulation applications due to its ability to reduce sound transmission and provide additional insulation. Manufacturers have been utilizing this type of material for years and it continues to be an important part of modern electronics and construction.
The specific data is subject to PDF, and the above content is for reference
TAPE POLYMER RESIN 12.7MM 5/PK
SHEET PLYMR RESIN 25.4MM SQ 5/PK
SHEET FABRIC 19.1X101.6MM 100/PK
TAPE FABRIC COPPER 100/PK
FLEX SUPPRESSOR / NOISE SUPPRESS
MF500-117 .625X12X12 ECCOSORB