Allicdata Part #: | 3M11304-ND |
Manufacturer Part#: |
5-1170-1S |
Price: | $ 7.03 |
Product Category: | RF/IF and RFID |
Manufacturer: | 3M (TC) |
Short Description: | SHEET ALUM FOIL 25.4MM SQ 5/PK |
More Detail: | N/A |
DataSheet: | 5-1170-1S Datasheet/PDF |
Quantity: | 1000 |
5 +: | $ 6.39072 |
Series: | 1170 |
Part Status: | Active |
Type: | Shielding Sheet |
Shape: | Square |
Length: | 1.000" (25.40mm) |
Width: | 1.000" (25.40mm) |
Thickness - Overall: | 0.003" (0.08mm) |
Operating Temperature: | -40°C ~ 130°C |
Adhesive: | Conductive, Single Sided |
Material: | Aluminum Foil |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RFI and EMI Shielding and Absorbing Materials has been utilized for decades in order to protect sensitive devices from electromagnetic interference. 5-1170-1S Shielding and Absorbing Materials is a versatile RFI/EMI shielding and absorbing product that is offered by many companies to reduce and shield the likelihood of electrostatic discharge and RFI/EMI. It is composed of a flexible, but conductive, elastomeric compound that is pliable enough to be used in intricate shapes and designs.
Application Field
The 5-1170-1S Shielding and Absorbing Materials are applied in many different applications. These are mostly used for shielding and absorbing RFI/EMI in military, commercial, automotive, aerospace, telecom, consumer electronics and some medical applications. In addition, this material can also be used in RF filters, microwave waveguide systems, EMI/RFI absorbers, shielding solutions for indoor and outdoor applications, providing high performance noise shielding for vehicle communications systems, telecommunication enclosures and many more.
Working Principle
RFI/EMI shielding has become an important part of protecting sensitive equipment and preventing unwanted signals from interfering with signal transmission. 5-1170-1S Shielding and Absorbing Materials works to protect the desired signal, and will help attenuate any unwanted signals that are present. The materials have been designed to absorb and reflect RFI/EMI in order to keep it away from sensitive components or areas where the signal is not desired.
These materials possess shielding effectiveness in excess of 90 dB up to 10GHz and feature a wide range of absorptive “tiles” of both low and high frequency absorbers. The absorptive tiles are made up of a flat sheet of metal that is electronically and magnetically conductive. The sheet is folded in the middle and is filled with a shielding material that acts to absorb RF energy. The absorptive tiles of 5-1170-1S Shielding and Absorbing Materials are laminated with a special coating, helping to reduce the amount of RF signals that escape into the environment.
The materials are capable of shielding and absorbing RFI/EMI from antennas, power lines, power cords, electrical motors, computers, and many other sources. The shielding effectiveness of the materials allows it to reduce unwanted signals that may interfere with a desired signal, ensuring that the desired signal remains intact. This helps to protect the device from EMI/RFI interference and guarantees optimum performance.
The specific data is subject to PDF, and the above content is for reference
TAPE POLYMER RESIN 12.7MM 5/PK
SHEET PLYMR RESIN 25.4MM SQ 5/PK
SHEET FABRIC 19.1X101.6MM 100/PK
TAPE FABRIC COPPER 100/PK
FLEX SUPPRESSOR / NOISE SUPPRESS
MF500-117 .625X12X12 ECCOSORB