Allicdata Part #: | 3M11380-ND |
Manufacturer Part#: |
5-1181-1 |
Price: | $ 7.26 |
Product Category: | RF/IF and RFID |
Manufacturer: | 3M (TC) |
Short Description: | TAPE COP FOIL 25.44MM CIR 5/PK |
More Detail: | N/A |
DataSheet: | 5-1181-1 Datasheet/PDF |
Quantity: | 1 |
1 +: | $ 6.59610 |
10 +: | $ 6.30630 |
25 +: | $ 5.73300 |
50 +: | $ 5.44635 |
100 +: | $ 5.30302 |
250 +: | $ 4.72974 |
500 +: | $ 4.44308 |
1000 +: | $ 3.92710 |
Series: | 1181 |
Part Status: | Active |
Type: | Shielding Sheet |
Shape: | Circular |
Length: | -- |
Width: | 1.000" (25.40mm) |
Thickness - Overall: | 0.003" (0.07mm) |
Operating Temperature: | -40°C ~ 130°C |
Adhesive: | Conductive, Single Sided |
Material: | Copper Foil |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RFID and EMI shielding and absorbing materials are widely used in various applications to provide protection against radio-frequency interference relating to electrical and electronic devices. The 5-1181-1 application field and working principle provide a detailed explanation of the characteristics of these shielding and absorbing materials, including their composition, construction, installation, testing, and applications.
Composition: The 5-1181-1 application field and working principle describe the physical and chemical characteristics of RFID and EMI shielding and absorbing materials. These materials are typically composed of plastic, polymers, or other material that provides greater structural stability and more effective absorption of electromagnetic waves. Special non-conductive materials are also used in order to reduce the potential for electrical or RF interference.
Construction: Shielding and absorbing materials are typically used in two construction categories: enclosures and self-adhesive films. Enclosures are typically built from metal or other material. The use of metal ensures maximum protection against high-frequency interference. Self-adhesive films provide a more lightweight solution as compared to metal enclosures but their effectiveness can be diminished by the effects of metal corrosion or extreme temperatures.
Installation: When installing RFID and EMI shielding and absorbing materials, the 5-1181-1 application field and working principle require attention to special instructions. These instructions include the orientation of the material for optimum performance, the thickness and type of the material, and the placement of the material to ensure maximal protection from interference.
Testing: Testing of RFID and EMI shielding and absorbing materials is a critical step in the 5-1181-1 application field and working principle. This testing must cover a variety of electrical and electromagnetic parameters to ensure that the material will successfully reduce the level of interference experienced by equipment. Testing should include, but not be limited to, direct current leakage, power and voltage measurements, broadband and narrowband shielding effectiveness measurements, and electromagnetic induced currents.
Applications: RFID and EMI shielding and absorbing materials can be used in a variety of applications. These materials are typically used in medical, military, aviation, and industrial settings where electrical and/or RF interference can have a detrimental effect on the operation of equipment. Common uses include protection of metal or plastic enclosures, wiring harnesses, and electrical components from unwanted interference. These materials can also be used to reduce the need for expensive RF filtering equipment.
The 5-1181-1 application field and working principle provide important information about the composition, construction, installation, testing, and applications of RFID and EMI shielding and absorbing materials. These materials provide important protection against unwanted interference and are essential components in the design and operation of many types of electrical and electronic devices.
The specific data is subject to PDF, and the above content is for reference
TAPE POLYMER RESIN 12.7MM 5/PK
SHEET PLYMR RESIN 25.4MM SQ 5/PK
SHEET FABRIC 19.1X101.6MM 100/PK
TAPE FABRIC COPPER 100/PK
FLEX SUPPRESSOR / NOISE SUPPRESS
MF500-117 .625X12X12 ECCOSORB