5-1372105-4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 5-1372105-4 application field and working principle is one of the many components that go into the construction of a modern electrical system. The 5-1372105-4 is a two pole power tolerance control relay. Its primary use is in current limiting or peak current limiting circuits, but it also can be used in motor control, over-current protection, DC motor protection, temperature control, and many others. Lets take a look at the specific application fields and working principles of the 5-1372105-4 to better understand its various uses.

One of the main uses of the 5-1372105-4 is in motor control, as it is designed to provide reliable over-current protection. The device can be used in all types of motor control, including AC, DC, stepper, brushless and more. It is also applicable in temperature control, as it is able to monitor and adjust the power level to keep the motor in a safe operating temperature range. The 5-1372105-4 can also be used in current limiting circuits, as it is designed to prevent over-current conditions from occurring in the circuit by limiting the amount of current that is allowed to flow through it. This is beneficial for protecting both the motor and the other components that are or could be connected to it.

The working principle of the 5-1372105-4 is based on the use of a digital controller to monitor the circuit. The controller works by reading the voltage level in the circuit, and then adjusting the current depending on the voltage level. If the voltage level is too high, the current will be limited so that it does not exceed a certain threshold. If the voltage is too low, the current will be increased to make up the difference and meet the proper power requirements of the circuit. The controller also monitors the temperature of the motor, and if the motor is operating too hot or too cold, it will adjust the current levels accordingly.

The 5-1372105-4 also has an adjustable overload and under-load current setting, which allows the user to select the maximum current that is allowed to flow through the circuit. This is especially useful in motor control applications, as it prevents the motor from getting overloaded or damaged due to excessive current flow. Additionally, the 5-1372105-4 can be adjusted to prevent certain types of overloads, such as peak current overloads, or short circuit overloads.

The 5-1372105-4 also provides a galvanically isolated circuit, which makes it much safer to use in a variety of applications. By isolating the motor from the rest of the circuit, the risk of a dangerous short circuit or an unexpected power surge is greatly reduced. This is especially important for applications such as motor control and temperature control, as these are sensitive applications that can become very dangerous if power is not managed properly.

As one can see, the 5-1372105-4 is a very versatile component that can be used in a variety of applications. Its uses range from motor control and current limiting to temperature control, overload and under-load current protection, and galvanic isolation. Its features make it perfect for providing a reliable power level to motors, and for protecting them and other components from potentially dangerous power surges or short circuits.

The specific data is subject to PDF, and the above content is for reference