5018-G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LED illumination has become the most popular source of lighting for both commercial and residential applications. With the number of LED lighting products increasing rapidly, it’s important to understand the different product types and the advantages and disadvantages that each has.

The 5018-G is a type of LED light that falls into the category of COBs. COBs, or chip-on-board LEDs, are semiconductor-based packages in which large numbers of individual LEDs are installed onto a substrate before being mounted on a printed circuit board (PCB).

Application Field

The 5018-G is most commonly used in recessed lighting, strip lighting and accent lighting applications. It’s also popular for a variety of other applications including landscape lighting and interior architectural lighting, for example in museums, auditoriums, retail stores, banks and restaurants.

The 5018-G is a great choice for indoor and outdoor applications. As it is extremely resistant to shock, vibration and water, it can be placed in places that may be a little harder to reach, such as on walls or ceilings in a hotel lobby or restaurant.

Working Principle

The 5018-G works by using an onboard power supply to convert AC power to DC power. This DC power is then used to drive the LEDs and provide them with a constant current of electricity. The current is then converted into light that is evenly distributed over the surface area of the COB.

The 5018-G is designed to run at a constant current of 350mA. This ensures that the LED light is always outputting the same amount of power (within a certain degree of tolerance) and that each LED is receiving the correct amount of current without the need of any additional components.

The 5018-G is also designed with a thermal protection system which prevents the LED from operating at temperatures that are too high. This feature helps to protect the LED from damage caused by excessive heat and increases its overall longevity.

Advantages of 5018-G

One of the biggest benefits of the 5018-G is its high efficiency. Thanks to its onboard power supply, it has a very low power consumption which means that it requires minimal energy to run. This makes it a great choice for applications where power is a concern. It also has a long lifetime when operated correctly which reduces the need for maintenance.

The 5018-G is also very easy to install. As it is pre-wired, it can be inserted into an existing fixture with minimal effort. This makes it an ideal choice for applications where it may be difficult to access the lighting source. Additionally, it is available in a range of different colours, allowing for further customization of the application.

Disadvantages of 5018-G

The biggest disadvantage of the 5018-G is its relatively high cost compared to other LED lighting products. This is due to the cost of the materials and components used to construct the COB and the labor intensive nature of the assembly process. Additionally, the 5018-G is not dimmable, so it is unsuitable for applications where adjustable brightness is necessary.

The 5018-G is also not rainproof and is best used in applications where there is no threat of water ingress. Therefore, it is not recommended for exterior applications unless it is enclosed in a suitable waterproof housing.

Overall, the 5018-G is a great choice for applications where power is a concern and where easy installation is paramount. Its high efficiency and long lifetime make it a great choice for both commercial and residential applications. However, it is important to consider the cost and the fact that it is not dimmable or rainproof before investing in the 5018-G.

The specific data is subject to PDF, and the above content is for reference