5022-113G

DC Resistance (DCR):	1.05 Ohm Max
Height - Seated (Max):	0.230" (5.84mm)
Size / Dimension:	0.520" L x 0.250" W (13.21mm x 6.35mm)
Supplier Device Package:	--
Package / Case:	2-SMD
Mounting Type:	Surface Mount
Inductance Frequency - Test:	2.5MHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	44MHz
Q @ Freq:	60 @ 2.5MHz
Series:	5022
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	565mA
Tolerance:	±2%
Inductance:	11µH
Material - Core:	Iron
Type:	--
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors refer to the installed inductors in electronic circuits. Generally they are cylinders or blocks with relatively large sizes. 5022-113G is a fixed inductor widely used in power supply applications. The 5022-113G inductor is designed to contain two windings around a ferrite core. It is important to note that there is a gap in the core, in order to reduce the core\'s ability to act as a transformer. This allows the inductor to function as an inductor and pass higher frequencies with less attenuation. The function of this inductor is to store energy electro-magnetically. To do this, when a coil of wire is placed close to the core, the magnetic field produced by the electricity spins the electrons around and creates a loop. This loop stores the energy, allowing it to be used at a later time. As the current passes through the wire, the electrons move back and forth through the coil, creating an oscillating electric field, which is then used to create a different magnetic field. This magnetic field is what generates the power that can be used for various applications. The 5022-113G has an inductance of 2.25mH, and the windings are insulated to a voltage rating of 250V. It is expected to work in temperatures up to 175 degrees Celsius, and is suitable for outputs between 10V and 240V. The 5022-113G inductor is used in a variety of applications, such as in D.C. to D.C. Converters and Power Supplies, as well as in switch mode power supplies. In such power supplies, the inductor is used to store energy during the \'off\' states, so that it can later be used to smooth out the output voltages when they\'re going through a rapid transition. It is also used to protect the output voltage against over-voltage surges, and can help to ensure that the power supply does not exceed any of its specified current/voltage regulations. The 5022-113G inductor can be used as an output filter in switching regulators, and it can also be used to provide a high input impedance in input stages when used in combination with capacitors. One of the main benefits of this is that when the capacitors are used, they can help to reduce the amount of ripple in the output voltage. The 5022-113G inductor is also widely used in scenarios where E.M.I (Electrical Magnetic Interference) noise is an issue. In such cases, the inductor can help to cancel out some of the high frequency noise, preventing it from interfering with the circuit design. Overall, the 5022-113G inductor is an extremely versatile and reliable component, with a wide range of applications in a variety of electronic circuits. It is designed to provide a high level of stability, and the fact that it is relatively inexpensive makes it an attractive option for those looking to save money.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description