5022-914G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are essential components used in many electrical circuits. They are usually used to store electrical energy, to provide a certain amount of impedance. The inductor type of which we will now discuss is the 5022-914G, a non-polarised radial leaded device

The basic principle of operation of the 5022-914G is that it consists of a coil of wire wound around an iron core. When current is applied to the inductor, it induces magnetic flux which in turn can create a voltage between the terminals. This is the mathematical definition of inductance. The inductance of the 5022-914G is measured in henrys (H), with a value of 0.15 H.

The 5022-914G has a range of applications in circuits for pulse shaping, alternating current power supplies, AC/DC transformer circuits, and DC/DC converters. It is used to regulate DC current, provide inrush current protection, reduce power dissipation in circuits, and provide filtering. By connecting two 5022-914G inductors in series, it is possible to double the inductance, enabling greater energy storage.

When installing the 5022-914G inductor, it is important to pay attention to the orientation of the core and to ensure that the leads are not damaged during installation. Also, if the inductor is being used in a circuit with high voltage and/or high currents, it should be installed in an enclosure to protect it from heat and voltage spikes. Additionally, the 5022-914G should be mounted securely into a circuit board and precautions should be taken to ensure that it is insulated from any metal parts.

Most of the 5022-914G inductors are rated for temperatures ranging from -40ºC to +125°C, with some higher temperature models being available. It is important to remember that the inductance values of the 5022-914G inductors will decrease with increasing temperatures.

Finally, it is important to bear in mind that the 5022-914G is a non-polarised device, meaning that it can be used in circuits with positive and negative voltages. However, if the voltage applied to it exceeds its rated current, its inductance will be reduced and it may be damaged.

In summary, the 5022-914G is a type of non-polarised radial leaded inductor which has a range of applications in circuits for power supplies, AC/DC converter circuits, and DC/DC converters. It is rated for temperatures ranging from -40ºC to +125°C, though its inductance will decrease with increasing temperatures. It is important to install and use it properly, as applying a voltage above the rated current can damage the device.

The specific data is subject to PDF, and the above content is for reference