50SVPK33M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum - polymer capacitors, commonly referred to as aluminum-polymer, are a type of electrolytic capacitor. They consist of an anode of aluminum foil that is separated from a cathode of aluminum oxide film by a layer of polymer. The polymer layer is usually a dielectric material, such as ethylene-tetrafluoroethylene (ETFE), which is also known as PTFE or Teflon. This type of capacitor is often smaller than other electrolytic capacitors and can store a larger amount of energy.

Because of its low ESR, the 50SVPK33M is a preferred aluminum-polymer capacitor for use in energy-storage, energy-conversion, and other high-voltage applications, where the ability to manage heat dissipation and to provide a large capacity of energy at both high and low voltage is critical. With its low ESR, the 50SVPK33M can support operating frequencies up to 50 MHz and offer faster charging times for power applications. Due to its capacity to hold high voltage, this type of capacitor can draw a large amount of transient current, which makes it ideal for use in applications such as power back-up storage and rectifiers.

The working principle of an aluminum-polymer capacitor is based on Faraday’s Law of Electrolysis and consists of two distinct parts: the anode and the cathode. The anode of the capacitor consists of a thin layer of aluminum foil that is separated from the cathode by a layer of polymer material. The two plates of aluminum foil act as the poles of the capacitor, and the electrolyte between the plates is the dielectric, which serves as the insulating material. The electrolyte acts as a barrier between the two plates, and when a voltage difference is applied across the plates, the capacitor will draw electric current from the external circuit into its anode.

The cathode of the aluminum-polymer capacitor is a thin film of aluminum oxide. This film acts as a barrier between the anode and the electrolyte, allowing the electric current to flow through the electrolyte and into the anode. The electric current then penetrates the aluminum film and bonds onto the electron-rich surface of the aluminum oxide film. The amount of current that can be drawn from the capacitor is determined by the capacitance and the voltage applied across the capacitor\'s plates.

The 50SVPK33M aluminum-polymer capacitor is often used in high-current power conversion applications and energy-storage devices. This capacitor offers excellent performing parameters, such as high capacitance, low voltage drop, and low ESR. It is also used in applications such as LED drivers, pulse-width modulation (PWM) controls, DC/DC converters, and energy-conversion circuits. In addition, this type of capacitor can offer good stability and reliability over a wide operating temperature range.

In conclusion, the 50SVPK33M aluminum-polymer capacitor is an ideal component for high-current power applications and offers excellent performance parameters for energy-storage and energy-conversion applications. This capacitor offers a low ESR, allowing it to support higher operating frequencies than traditional electrolytic capacitors, and its high capacitance makes it a great choice for high-voltage applications. The aluminum oxide film on the cathode of the capacitor also aids in preventing corrosion, allowing for a long life span for the device.

The specific data is subject to PDF, and the above content is for reference