51-322-009

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Electromagnetic interference (EMI) and radio frequency interference (RFI) filters, also known as LC networks, are used in electrical equipment in order to prevent the emission of electromagnetic radiation. They are designed to reduce the level of electrical noise generated by the components that are connected to the power system. The type of filter used for any given application depends on the required performance and the electrical environment. In this article, we will discuss the application field and working principle of a 51-322-009 filter.

The 51-322-009 filter is a general-purpose power line filter designed for use in industrial and instrumentation equipment. It contains four sections: the input, output, and two EMI/RFI filter sections. The filter is typically used to reduce common-mode radiation on the power line, as well as reduce the EMI/RFI components present. The input section consists of an inductor and two capacitors that reduce the differential-mode (DM) components and provide an impedance match to the input. The output section contains an inductor and two electronic components necessary for the output impedance match. The filter also includes two EMI/RFI filter sections, each consisting of an inductor, two capacitors and two current-sense resistors.

The working principle of the 51-322-009 filter can be divided into two parts: differential-mode (DM) and common-mode (CM). The input section is designed to reduce the DM components of the signal, which are typically caused by ground loop currents. The inductor and capacitors create a high-pass filter that reduces the lower-frequency components of the signal. The output section consists of an inductor, two capacitors, and two sense resistors to match the output impedance. The EMI filter sections reduce both DM and CM components by creating a low-pass filter. The inductors, capacitors, and resistors combine to reduce the high-frequency components of the signal, thus reducing the emission of EMI/RFI radiation.

The 51-322-009 filter is designed for use in a wide variety of industrial and instrumentation equipment, such as motor control, process control, medical equipment, telecommunications, and consumer electronics. It is typically used to reduce conducted EMI/RFI radiation from the power lines, which can cause interference with other equipment. In addition, it can be used to reduce emissions from EMI/RFI conductors and reduce coupling between the power lines and other RF sources. This filter can also be used to reduce conducted interference from the internal circuits of the equipment.

In summary, the 51-322-009 filter is a general-purpose EMI/RFI filter designed for use in industrial and instrumentation equipment. It contains four sections that combine to reduce both differential-mode and common-mode noise. The filter is used to reduce conducted emissions from the power lines and other RF sources. It is also used to reduce conducted interference from the internal circuits of the equipment, thus increasing its performance.

The specific data is subject to PDF, and the above content is for reference