Allicdata Part #: | 1171-1003-ND |
Manufacturer Part#: |
51-322-015 |
Price: | $ 0.00 |
Product Category: | Filters |
Manufacturer: | API Technologies Corp |
Short Description: | FILTER LC 0.36UF CHASSIS |
More Detail: | LC EMI Filter 2nd Order Low Pass 1 Channel C = 0.3... |
DataSheet: | 51-322-015 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current: | 25A |
Height: | -- |
Size / Dimension: | 0.687" Dia x 0.629" L (17.45mm x 15.97mm) |
Package / Case: | Axial, Bushing - 2 Solder Eyelets |
Mounting Type: | Chassis Mount |
Voltage - Rated: | 400V |
Applications: | General Purpose |
Operating Temperature: | -55°C ~ 125°C |
ESD Protection: | No |
Values: | C = 0.36µF |
Series: | -- |
Resistance - Channel (Ohms): | 0.007 |
Attenuation Value: | 62dB @ 100MHz |
Center / Cutoff Frequency: | -- |
Number of Channels: | 1 |
Technology: | LC |
Filter Order: | 2nd |
Type: | Low Pass |
Part Status: | Discontinued at Digi-Key |
Packaging: | Tray |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
EMI/RFI filters play an important role in modern electronics. They are electronic components that are used to attenuate undesired electromagnetic signals, ranging from transients or high frequency interference, that could otherwise disrupt or interfere with the proper operation of an electronic device. The purpose of an EMI/RFI filter is to provide protection for sensitive electronic components and allow them to operate without undue interference.
The 51-322-015 is an EMI/RFI filter designed specifically for use in communications equipment. It is a passive component consisting of a combination of LC (Inductance/Capacitance) and RC (Resistance/Capacitance) networks. The LC network is composed of several inductors and capacitors that form an impedance line which blocks high-frequency interference from entering the circuit. The RC network is composed of resistors and capacitors that form a low-pass filter which attenuates transient noise and ripple that can interfere with the function of communications.
The 51-322-015 provides excellent protection in applications where emissions are high, such as in mobile and cellular phones. The filter can significantly reduce EMI and RFI emissions while also providing good performance in high power-level applications. The filter is also compatible with most portable electronics and can be used in low power applications as well. In addition, the 51-322-015 provides excellent protection against ESD (Electrostatic Discharge) and EMI (Electromagnetic Interference) in communications systems.
The working principle of the 51-322-015 filter is based on the principles of impedance, reactance, and filtering. The filter is designed so that high-frequency interference is blocked by the LC network, while low-frequency signals are allowed to pass through the RC network. The resistors provide the necessary impedance to block the high-frequency signals, while the capacitors allow lower-frequency signals to pass through. In addition, the filter is designed to reduce EMI emissions by causing the energy in the interfering signals to be dissipated as heat, instead of being allowed to enter the communication circuits.
The 51-322-015 is an excellent choice for applications where EMI and/or RFI protection is paramount. Its combination of LC and RC networks provides excellent protection against electromagnetic interference and transients. The filter is also highly compatible with most portable electronics and can be used in low power applications as well.
The specific data is subject to PDF, and the above content is for reference
FILTER LC HIGH FREQ 100PF 0805LC (T-Type...
FILTER RC(PI) 100 OHM/12.5PF SMDRC (Pi) ...
FILTER LC(PI) 1750PF CUSTOMLC (Pi) EMI F...
FILTER LC(PI) 0.1UH/5000PF SMDLC (Pi) EM...
FILTER LC 22PF 210MHZ SMDLC EMI Filter 2...
FILTER RC(PI) 100 OHM/8PF SMDRC (Pi) EMI...