Allicdata Part #: | 51-353-054-ND |
Manufacturer Part#: |
51-353-054 |
Price: | $ 0.00 |
Product Category: | Filters |
Manufacturer: | API Technologies Corp |
Short Description: | FILTER LC 0.45UF CHASSIS |
More Detail: | LC EMI Filter 2nd Order Low Pass 1 Channel C = 0.4... |
DataSheet: | 51-353-054 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current: | 5A |
Height: | -- |
Size / Dimension: | 0.375" Dia x 0.770" L (9.52mm x 19.57mm) |
Package / Case: | Axial, Bushing - 2 Solder Eyelets |
Mounting Type: | Chassis Mount |
Voltage - Rated: | 100V |
Applications: | General Purpose |
Operating Temperature: | -- |
ESD Protection: | No |
Values: | C = 0.45µF |
Series: | -- |
Resistance - Channel (Ohms): | 0.015 |
Attenuation Value: | 70dB @ 100MHz ~ 1GHz |
Center / Cutoff Frequency: | -- |
Number of Channels: | 1 |
Technology: | LC |
Filter Order: | 2nd |
Type: | Low Pass |
Part Status: | Discontinued at Digi-Key |
Packaging: | Tray |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The 51-353-054 EMI/RFI filter is an industry-standard filter designed to prevent any electronic noise generated by connected equipment from passing between the components. This filter is composed of an active filter, a passive filter, and an inductor. The active filter is composed of an inductor and a pair of capacitors, both connected in series between either side of a common ground. The capacitors\' charges allow the inductor to act as a capacitor, which effectively blocks the power noise from passing between the two components.
The passive filter works similarly to the active filter, but instead uses a resistor in place of the inductor. This provides the same blocking effect, but does not rely on any active circuitry to perform its job. The inductor, on the other hand, provides an additional passage of energy, allowing for greater range and increased fidelity of power noise suppression.
The 51-353-054 EMI/RFI filter can provide the same standard of protection as many other EMI filters on the market. Its size and design are suitable for a wide range of applications, and its compatibility with most existing circuits makes it a cost-effective choice. In addition, the filter is designed to be very efficient, meaning it uses minimal energy when active and can help extend the life of a connected device which must remain operational.
The 51-353-054 EMI/RFI filter\'s primary application is shielding sensitive electronic circuits from the interference of external sources. Common applications include medical equipment, automotive electronics, telecommunications, and industrial controllers. The filter can also be used in a variety of other environments, protecting equipment from sources ranging from nearby cell phones to fluorescent lighting and other forms of radiation.
The 51-353-054 EMI/RFI filter\'s working principle is based on the concept of “tuning out” undesirable frequencies. By connecting the active filter between two components, the filter allows the passage of frequencies within the desired range and blocks any extraneous signals. The passive filter performs a similar job, only using a resistor instead of an inductor. This provides a more traditional form of protection, but generally offers less protection than the active filter.
The 51-353-054 EMI/RFI filter is a highly efficient and cost-effective solution for protecting against external interference. Its combination of an active filter and a passive filter makes it suitable for a variety of applications, and its small size and reasonable cost make it a great option for any situation where reliable and consistent power noise protection is required.
The specific data is subject to PDF, and the above content is for reference
FILTER LC HIGH FREQ 100PF 0805LC (T-Type...
FILTER RC(PI) 100 OHM/12.5PF SMDRC (Pi) ...
FILTER LC(PI) 1750PF CUSTOMLC (Pi) EMI F...
FILTER LC(PI) 0.1UH/5000PF SMDLC (Pi) EM...
FILTER LC 22PF 210MHZ SMDLC EMI Filter 2...
FILTER RC(PI) 100 OHM/8PF SMDRC (Pi) EMI...