51-353-080 Allicdata Electronics
Allicdata Part #:

51-353-080-ND

Manufacturer Part#:

51-353-080

Price: $ 0.00
Product Category:

Filters

Manufacturer: API Technologies Corp
Short Description: FILTER LC 0.25UF CHASSIS
More Detail: LC EMI Filter 2nd Order Low Pass 1 Channel C = 0.2...
DataSheet: 51-353-080 datasheet51-353-080 Datasheet/PDF
Quantity: 1000
1 +: 0.00000
Stock 1000Can Ship Immediately
$ 0
Specifications
Current: 5A
Height: --
Size / Dimension: 0.375" Dia x 0.783" L (9.52mm x 19.90mm)
Package / Case: Axial, Bushing - 2 Solder Eyelets
Mounting Type: Chassis Mount
Voltage - Rated: 150V
Applications: General Purpose
Operating Temperature: --
ESD Protection: No
Values: C = 0.25µF
Series: --
Resistance - Channel (Ohms): 0.015
Attenuation Value: 70dB @ 100MHz ~ 1GHz
Center / Cutoff Frequency: --
Number of Channels: 1
Technology: LC
Filter Order: 2nd
Type: Low Pass
Part Status: Discontinued at Digi-Key
Packaging: Tray 
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI Filters, or LC, RC networks are a type of electronic device used in a variety of applications to filter out and protect from interference caused by external or internal sources. This applies to both electromagnetic interference (EMI) and radio frequency interference (RFI). These filters play an important role in protecting sensitive electronic components from electrical signals that can cause signal degradation, signal contamination, and complete system failure. The models most commonly used are the 51-353-080 EMI and RFI filter.

The 51-353-080 filter utilizes a series of capacitors, resistors and inductors to attenuate high frequency signals. The capacitors provide a low impedance path for common mode signals and decrease their amplitude. The inductors block out common mode signals at higher frequencies and provide an efficient way to reject crosstalk. The resistors serve to limit the amount of current that flows through the network, attenuating the amplitude of both common and differential mode signals. By selecting the appropriate values for these components, the correct level of attenuation can be achieved to protect the electronic system.

The 51-353-080 filter can be used in a variety of applications where EMI/RFI prevention is desired. These filters can be used in commercial products, such as computers and telecommunications equipment, or in industrial machinery. They can also be used in medical equipment or for military applications. They are also commonly used in automotive, aerospace, and consumer electronics.

In many applications, the 51-353-080 filter is used to provide noise protection from sources such as electrostatic discharge (ESD). By blocking certain high frequency signals, ESD can be prevented from damaging sensitive components on a circuit board or even the entire system itself. The filter can also be used in applications like computer networks, where it reduces disruptive electromagnetic interference (EMI) and radio frequency interference (RFI). This interference can degrade the quality of the signal and degrade the performance of the system.

The 51-353-080 filter can also be used in conjunction with other attenuation devices and components to create an effective shielding solution. In this case, the filter is used to reduce the level of interference before the shielding device is employed in order to maximize effectiveness. In some cases, the filter can also be used on its own as a shielding device.

The 51-353-080 filter works best when used in applications that require low-noise operation. It is ideal for applications that require high signal bandwidths, power supplies, and other components that are sensitive to EMI and RFI. Additionally, the filter is also suitable for applications with high-speed switching, as it is able to reduce radiating signals.

In summary, the 51-353-080 filter is an effective EMI/RFI filter that can be used in a variety of applications to reduce the effects of interference and protect sensitive components. It utilizes a series of capacitors, resistors, and inductors to attenuate high frequency signals and offers an efficient way to reject crosstalk. It can be used on its own or in conjunction with other shielding devices. By using the filter correctly, it is possible to achieve noise-free operation and enable electronic components to perform at their optimum level.

The specific data is subject to PDF, and the above content is for reference

Latest Products
NFM21HC101U1H3D

FILTER LC HIGH FREQ 100PF 0805LC (T-Type...

NFM21HC101U1H3D Allicdata Electronics
CM1622-08DE

FILTER RC(PI) 100 OHM/12.5PF SMDRC (Pi) ...

CM1622-08DE Allicdata Electronics
M15733/33-0002

FILTER LC(PI) 1750PF CUSTOMLC (Pi) EMI F...

M15733/33-0002 Allicdata Electronics
4700-056M

FILTER LC(PI) 0.1UH/5000PF SMDLC (Pi) EM...

4700-056M Allicdata Electronics
MEA2010LC220

FILTER LC 22PF 210MHZ SMDLC EMI Filter 2...

MEA2010LC220 Allicdata Electronics
AOZ8175DI

FILTER RC(PI) 100 OHM/8PF SMDRC (Pi) EMI...

AOZ8175DI Allicdata Electronics