51-359-044

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Electromagnetic interference (EMI) and radio frequency interference (RFI) are forms of interference created by electrical devices that can negatively affect the performance or proper functioning of other electrical devices. To help mitigate the risk of this type of interference, EMI/RFI filters, such as the 51-359-044 series, are used. These filters employ a combination of LC and RC networks, which are discussed in further detail below.

LC Networks: LC networks are comprised of inductors and capacitors which, when connected in a certain pattern, allow an electrical signal to pass through, while attenuating any unwanted interference. The 51-359-044 series uses LC networks to form low-pass, band-pass, and high-pass filter circuits. These circuits act to filter out or attenuate any unwanted signals that may interfere with the performance of the device. The filter networks are also designed to reject interference from up to two frequency bands in the range of 1 MHz to 12.4 GHz.

RC Networks:RCL networks are commonly used to suppress radio frequency interference (RFI). Like LC networks, RCL networks are comprised of inductors and capacitors, although in this case the capacitor is in parallel with the resistor. Like with LC networks, RCL networks are designed to filter out unnecessary signals while allowing only desired signals to pass through. The 51-359-044 series uses RCL networks to filter out noise frequencies from up to five bands in the range from 1 MHz to 1 GHz.

Application and Working Principle:The 51-359-044 series of EMI/RFI filters is designed to suppress electromagnetic interference (EMI) and radio frequency interference (RFI) in applications where high-speed data transmission is required. The filter networks are designed to reject interference from up to two frequency bands in the range of 1 MHz to 12.4 GHz, and filter out noise frequencies from up to five bands in the range from 1 MHz to 1 GHz. The LC and RCL networks are optimized using optimized impedance matching and filtering techniques, allowing for the highest level of performance possible.

In order for the 51-359-044 series of filters to work properly, they must be connected properly. The filter must be connected to the circuit board such that the input of the filter is connected to the circuit board\'s signal line, and the output of the filter is connected to the ground line. This allows the filter to properly attenuate any interference signals that may be emitted from the device or the environment. Additionally, the filter should be connected as close as possible to the device, as this will reduce the amount of interference that can be transmitted through the circuit board.

The 51-359-044 series of EMI/RFI filters provide the most effective solution for reducing interference in high-speedelectrical systems. Their combination of LC and RCL networks are optimized for high-frequency interference attenuation, making them the ideal choice for applications such as wireless data transmission, multimedia systems, and automotive electronics. The filters are easy to install and require minimal maintenance, making them a reliable option for any application.

The specific data is subject to PDF, and the above content is for reference