510ACA101M500AAG

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	18mA
Height - Seated (Max):	0.071" (1.80mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	43mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	Si510
Voltage - Supply:	3.3V
Output:	LVPECL
Function:	Enable/Disable
Frequency:	101.5MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: 510ACA101M500AAG Application Field and Working Principle

Oscillators are electronic circuits used to generate repetitive signals. These signals can be of sine, square, triangular, and sawtooth waveforms. The applications of oscillators vary from low frequency signals in power supplies to high frequency signals in radio and communication. In this article, the application field and working principle of a specific type of oscillator, the 510ACA101M500AAG, is discussed. The 510ACA101M500AAG is an amplifier/oscillator type of oscillator. This type of oscillator is typically used for low-frequency applications such as motor control and general-purpose switching in communication equipment. It is widely used because it offers a wide range of frequency options, from 0.5 MHz to 10 MHz, and a high output current of up to 10 mA. The working principle of an amplifier/oscillator type of oscillator is based on the fact that amplifiers can be used to amplify signals of various frequencies. When an amplifier is combined with a feedback circuit, a self-sustaining oscillation can be achieved, resulting in the generation of an oscillating signal. The oscillating signal can be used to generate an output frequency different from the input frequency. The 510ACA101M500AAG is composed of a single transistor operating in the collector-coupled Class A oscillator configuration, with an integrated Zener bias. The Zener diode sets the bias voltage, which is set at a given value and remains constant as the temperature or load changes. The bias voltage is used to stabilize the oscillator\'s performance over varying temperatures and load conditions. The oscillator is also equipped with three external capacitors, a resonator, and two resistors in order to control the gain and the frequency of the oscillator circuit.The resonator used in the 510ACA101M500AAG oscillator is typically an overtone crystal, which is ideal for generating high frequency signals. By employing quartz crystal resonators, the frequency of the output signal can be accurately controlled and stabilized. This helps to ensure that the generated signal remains within the frequency range of the oscillator. The 510ACA101M500AAG oscillator is typically used in a wide variety of applications, including motor control, frequency-to-voltage conversion, and as a low-power signal source. It is also used for modulating a radio signal in communication and survey systems. The circuit can also be used to create complicated frequencies that are required for certain test instruments and medical imaging systems. Its high output current makes it ideal for sensing and regulating motor speed and other power control applications.In conclusion, the 510ACA101M500AAG is a type of amplifier/oscillator oscillator designed for a wide range of low-frequency applications. It is composed of a transistor operating in a collector-coupled class A amplifier configuration, combined with a Zener diode for bias and three external capacitors, a resonator, and two resistors for frequency and gain control. Its wide range of frequency options and high output current make it suitable for a variety of uses, including motor control, frequency-to-voltage conversion, modulating radio signals, and medical imaging.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description