510CBA25M0000BAG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are used to generate a periodic waveform, which is used as signal sources in analog and digital signal processing systems. The 510CBA25M0000BAG is an oscillator used for the transmission and reception of digital signals.

The 510CBA25M0000BAG is a low-power, low-frequency oscillator circuit, designed to operate within the frequency range of 25.00 ± 2.50 MHz. The component consists of two complementary bipolar transistors and two resistors. When power is applied, the circuit produces a square waveform, which has a sharp rise and fall time. The frequency of the waveform is determined by the frequency-determining components, which are connected to the output of the circuit.

The 510CBA25M0000BAG has a wide range of applications. It can be used to generate a carrier frequency for digital signalMHz transmission, modulate digital data or as a clock signal for digital circuitry operation. It can also be used to generate a digital signal with a wide variety of adjustable parameters such as frequency, phase and amplitude.

The 510CBA25M0000BAG has an operating temperature range of 0°C to +70°C. The device is constructed of two terminals: one for input voltage and one for output square wave signal. The input voltage can range from 12V to 15V. The frequency of the output is determined by the resistor and transistor components of the device, while the amplitude is determined by the input voltage.

The working principle of the 510CBA25M0000BAG is based on the concept of recharging and overcharging of the emitters of the bipolar transistors. When power is applied, current flows into the emitter of the transistor and charges the capacitor, which is connected to the output of the circuit. When the capacitor is fully charged, current stops flowing into the emitter and the voltage applied to the base of the transistor rises rapidly which causes the transistor to switch on and the output connected to the drain of the transistor goes high. This cycle repeats until the power to the circuit is removed.

The 510CBA25M0000BAG is a low power, low frequency oscillator designed for transmission and reception of digital signals. It is a versatile component which is capable of generating signals with adjustable frequency, phase and amplitude. It has a wide range of applications including modulation of digital data, transmission of digital signals and as a clock signal for digital circuitry operation.

The specific data is subject to PDF, and the above content is for reference