510CCA6M78000AAG

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	18mA
Height - Seated (Max):	0.071" (1.80mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	26mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	Si510
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Enable/Disable
Frequency:	6.78MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators Oscillators are electronic circuits that use the feedback connection to produce time-varying signals that repeat in a cycle, usually sinusoidal or square wave. Oscillators have the main function of generating a periodic electrical signal and are widely used in many fields. As a type of oscillator, 510CCA6M78000AAG has its special application field and working principle.510CCA6M78000AAG is an oscillator under the family of Voltage Controlled Oscillators (VCOs). It can be used as an local oscillator in military, government and commercial Radio Frequency (RF) and microwave applications. As for its application field, it is suitable for applications from 10 MHz to 1000 MHz in the HF, VHF and UHF frequency bands. In addition, it is also suitable for an enabling usage in a wide variety of modern navigation, tracking, surveillance, communication and computer networks. The broadband and versatile architecture of 510CCA6M78000AAG circuit design allows for stable operation over a wide range of voltage, temperature and current environment. This circuit is produced by fabrication process that enable small-size circuitry to achieving high performance/cost ratio. At a basic level, the working principle of 510CCA6M78000AAG is based on a negative feedback scheme providing a stable output signal. The feedback loop includes the baseband amplifier, baseband filter and output buffer. The output feedback signal of the oscillator is amplified and narrow band filtered. The filtered signal is then passed to the output buffer which amplifies the signal and supplies the oscillator frequency. The circuit creates an input signal that decides the phase and frequency of the output signal.In addition, the circuit can be connected to external components making it suitable for more specific applications. For example, an external inductor could be connected to the oscillator\'s Vcc pin, making the circuit act as an active antenna. This would allow electromagnetic radiation to be broadcast in a specific direction even though the antenna is located in unfavorable environment. In conclusion, 510CCA6M78000AAG is a voltage controlled oscillator designed to work in moderate tohigh frequency applications which has the potential to be easily customized for more specific usages.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description