510KCB11M2896BAG

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	18mA
Height - Seated (Max):	0.050" (1.28mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	26mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	Si510
Voltage - Supply:	1.8V
Output:	CMOS
Function:	Enable/Disable
Frequency:	11.2896MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>Oscillators are frequency generating circuits used to create a periodic, repeated sequence of electrical values that can vary in magnitude and polarity. The 510KCB11M2896BAG oscillator is a three-terminal voltage-controlled oscillator (VCO) with a wide frequency range of 2.7 to 10.2 MHz while still maintaining tight frequency stability over temperature and voltage. It is designed to meet the demands of demanding applications, such as protocol stacks, ultra-low power data converters, RF transceivers, and other signal integrity-sensitive applications.</p> <p>The 510KCB11M2896BAG oscillator is based on silicon Gate Array technology, which is the same technology used in advanced microprocessors. This technology provides the oscillator with low jitter and precise control. It also offers tight stability, which results in a highly reliable and precise oscillator.</p> <p>The 510KCB11M2896BAG oscillator is used in a variety of different applications. In communication systems, the oscillator is used for timing, synchronization, and frequency division. It is also used in radar and remote sensing to generate pulses of electromagnetic radiation for signal reception. Additionally, the oscillator can be used in instrumentation to drive transducers in process control and medical diagnostics.</p> <p>The working principle of the 510KCB11M2896BAG oscillator is based on the concept of feedback. The oscillator utilizes a feedback loop to form an oscillating wave. This feedback loop consists of an amplifier, a capacitor, and a resistor. By varying the ratios of these components, the frequency of the oscillator can be adjusted. The oscillator also has several control pins, such as an amplitude adjust pin and a frequency adjust pin. These pins allow the control signals to be sent to the oscillator in order to adjust and control the frequency and amplitude of the wave.</p> <p>In conclusion, the 510KCB11M2896BAG oscillator is a reliable and precise voltage-controlled oscillator that is used in a variety of applications. It is based on silicon Gate Array technology, which offers tight frequency stability over temperature and voltage. Additionally, its feedback loop allows the frequency and amplitude of the oscillator to be adjusted and controlled.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description