511ABA125M000BAGR

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	18mA
Height - Seated (Max):	0.050" (1.28mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	43mA
Operating Temperature:	-40°C ~ 85°C
Series:	Si511
Voltage - Supply:	3.3V
Output:	LVPECL
Function:	Enable/Disable
Frequency:	125MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to 511ABA125M000BAGR OscillatorsThe 511ABA125M000BAGR oscillator circuit is a versatile type of oscillator used to provide a stable sine wave output or other desired waveform. It uses a reverse bias field effect transistor (FET) to amplify and generate the output sine wave signal.Oscillators are a common type of electrical circuit used to generate a variety of repeating waveforms. Oscillators are usually comprised of three basic elements, the resonator, the amplifier and the control element. The resonator determines the frequency of the oscillation while the amplifier is used to increase the output power. The control element is used to maintain the stability of the oscillator.Application of 511ABA125M000BAGR OscillatorsThe 511ABA125M000BAGR oscillator has a variety of applications. It can be used as an oscillator in a variety of systems, such as in amplifiers, filters, power supplies and switched-mode power supplies. It can also be used in radio receiver systems, radio transmitters, telecommunication systems and sound systems. In addition, the 511ABA125M000BAGR oscillator can be used in the timing control of electronic systems, such as in digital clocks, or embedded monitoring systems.Working Principle of 511ABA125M000BAGR OscillatorsThe working principle of the 511ABA125M000BAGR oscillator is based on a reverse biased FET amplifier. This amplifier is used to amplify the sine wave output signal produced by the resonator, which is usually a quartz crystal. The sine wave output is then stabilized by the control element, which typically consists of a capacitor and a resistor, to maintain a stable frequency of the oscillator.The 511ABA125M000BAGR oscillator circuit is usually powered by a low-voltage DC power supply. The output signal can be adjusted by varying the FET amplifier bias voltage or by changing the frequency of the resonator. The output sine wave signal can be adjusted to different frequencies and amplitudes depending on the requirements of the application.ConclusionThe 511ABA125M000BAGR oscillator circuit is a versatile type of oscillator circuit used to provide a stable sine wave output or other desired waveform. It uses a reverse biased field effect transistor to amplify and generate the output sine wave signal. The 511ABA125M000BAGR oscillator has many different applications, including in amplifiers, filters, power supplies, radio transmitters and telecommunication systems. It uses a resonator, amplifier and capacitor/resistor control element combination to produce the stable sine wave output.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description