511EAA31M2500AAG

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	18mA
Height - Seated (Max):	0.071" (1.80mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	43mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	Si511
Voltage - Supply:	2.5V
Output:	LVPECL
Function:	Enable/Disable
Frequency:	31.25MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are electronic devices that produce a continuous, repetitive AC signal. This AC signal can be used to provide an “oscillating” effect to a periodic signal, such as a sinusoidal wave. Oscillators are commonly used in power supply, communications, audio, and many other applications. The 511EAA31M2500AAG is an oscillator device from the 511EAA family of devices, and is used as an oscillator in a variety of applications.

Applications

The 511EAA31M2500AAG can be used as a clock oscillator, a square wave oscillator, and as an audio oscillator. It is commonly used in audio systems such as headsets, speakers, and car audio systems. It is also used in power supply systems, where it can generate a positive or negative voltage to generate a low frequency waveform that can be used to drive a circuit.The 511EAA31M2500AAG can also be used as a USB oscillator, which requires a very low power, low frequency, and accurate signal. It is also used in microprocessors and CPUs, where it can provide a stable, low frequency signal for the processors to work with.

Working Principle

The 511EAA31M2500AAG works like any other oscillator. It produces an alternating current signal by creating a feedback loop. The oscillator’s circuit contains two components: an amplifier and an amplifier’s output connected to the input of the amplifier. The amplifier takes in an input signal, amplifies it, and sends the amplified version to the output of the amplifier. This amplified signal then goes back into the input of the amplifier, creating a feedback loop. This causes the amplifier to continuously amplify the signal, producing an alternating current signal.The output of the 511EAA31M2500AAG oscillator can be adjusted by changing the gain of the amplifier. The frequency and the amplitude of the output can also be adjusted by changing the capacitance or inductance of the components in the circuit.

Conclusion

The 511EAA31M2500AAG is an oscillator device from the 511EAA family of devices. It is used in a variety of applications, including audio systems, power supplies, microprocessors, and USB oscillators. It works by creating a feedback loop with an amplifier, which produces an alternating current signal. The output of the oscillator can be adjusted by changing the gain of the amplifier, or by changing the capacitance or inductance of the components in the circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description