512BBA000672AAGR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable Oscillators are a family of specialty oscillators that can be chosen to meet specific requirements. They feature a wide range of frequency options, small size, and low power consumption. The 512BBA000672AAGR is a typical example.

This oscillator utilizes a CMOS dual-modulus prescaler and counter to generate an oscillating signal from an input clock source. The oscillator frequency is dependent on the setting of the input pins. These pins control the value of the prescaler and counter to divide down the frequency of the original clock source. The prescaler divides the original frequency by either 1, 4, 16, or 64, and the counter can be set to any value from 1 to 4096. Combining these two outputs gives a total range of 4096 possible frequencies.

The 512BBA000672AAGR is ideal for applications that require a wide range of frequencies and small size. Its small size and low power consumption make it an ideal choice for embedded and space-restricted applications. Additionally, its wide range of frequencies and flexibility enable it to be used in different applications, such as frequency synthesis, clock generation, and time base generation.

The 512BBA000672AAGR is easy to install and use. It requires a 5 Volt supply and has four configurable pins (A0, A1, A2, A3). Setting the appropriate pin configuration will enable the desired frequency to be generated. The pins are connected to a digital circuit that controls the selection of the divide ratio, thus controlling the output frequency.

In conclusion, the 512BBA000672AAGR pin configurable/selectable oscillator offers a wide range of possible frequencies, small size, low power consumption and easy installation into embedded and space-restricted applications. Its flexibility also allows it to be used in different applications, making it an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference