512CCA001032AAG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin configurable oscillators are integrated circuits that can be configured on a device through configuration pins or selectable pins. These oscillators are used to provide a stable clock signal in different critical applications like designing complex microcontrollers or communication systems. When configured, these oscillators oscillate at different frequencies depending on the application requirement.

512CCA001032AAG is a pin configurable oscillator manufactured and distributed by Taitien Co., Ltd. It is an 8-pin surface mount oscillator capable of providing a stable clock signal at a frequency range of 10 – 32MHz. It has an operating voltage range from 1.7 – 3.6V and a storage temperature range of -40 to +85°C for enhanced compatibility.

The 512CCA001032AAG oscillator supports various output formats. These can be configured using the available pins and the voltage levels through a logic circuit. The logic levels for controlling the output format selection are 0.45V, 0.8V and 1.2V.

The 512CCA001032AAG oscillator also has two selectable pull up resistors with values of 1.0K and 4.7K respectively. These pull up resistors are used to connect the output signal to a high logic level in the presence of external ESD protection.

The 512CCA001032AAG oscillator has two modes of operation. The crystal mode is when the oscillator is running in its default state. The oscillator remains in this mode until the logic circuit is configured. The oscillator is then shifted to the Logic mode, where it is driven by the logic circuit.

The 512CCA001032AAG is available in a number of packages. These include an 8-pin DIP, 8-pin SOP, 8-pin SOIC and 8-pin SOT-23. It is an ideal choice for a variety of applications, ranging from consumer electronics to automotive communication systems.

In conclusion, the 512CCA001032AAG from Taitien Co., Ltd. is a pin configurable/selectable oscillator capable of providing a stable clock signal for any given application. It supports various output formats and has two selectable pull up resistors with values of 1.0K and 4.7K. It is available in multiple packages and offers enhanced compatibility with a wide range of products.

The specific data is subject to PDF, and the above content is for reference