513CCA000789BAG

Pin Configurable/Selectable Oscillators (PCSOs) are a type of oscillator that can be used in a variety of applications. They are designed to allow users to conveniently configure their output frequency, power requirement, and other parameters from the external connections.

The Pin Configurable/Selectable Oscillator (513CCA000789BAG) is a popular microelectronic component used in oscillator and signal generator circuits. It is a four-pin component that can be configured in one of three ways to provide an output frequency of up to 220 MHz. It can be configured as an oscillator, a signal generator, or both. In addition, it has low power consumption and a very small form factor.

The 513CCA000789BAG is usually connected to a PCB via two mounting holes. The four pins of the component have specific functions that allow it to be configured to produce the desired output frequency and signal quality. The first pin, or pin 0, is used to select the oscillator type, the second pin is used to control the power supply, the third pin is used to adjust the output frequency, and the fourth is used as a clock input.

The 513CCA000789BAG has two main modes of operation: an internal circuit and an external circuit. In the internal circuit mode, the component internally controls the oscillator frequency, power supply and other parameters. The external circuit mode uses external components such as capacitors, resistors and inductors to further adjust the output frequency and other parameters. It can be used in a variety of applications such as oscilloscopes, frequency counters, and communication systems.

The working principle of the 513CCA000789BAG is quite simple. It is essentially a voltage-controlled oscillator. This means that the frequency of the output signal will depend on the voltage applied to its pins. The output frequency can be adjusted by changing the voltage applied to each of the pins. The power supply pin can also be adjusted to determine the amount of power used by the oscillator.

The 513CCA000789BAG can be used in many different applications, including communication systems, frequency counters, oscilloscopes, and signal generators. It has a wide range of frequency capabilities and is designed with low power consumption in mind. Thanks to its convenient, pin-selectable configuration, this component can be easily integrated into any project requiring user-configurable oscillators.