513JAA000632BAG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable Oscillators are a type of oscillator that significantly simplify the design of electronic circuits. The 513JAA000632BAG is one of these devices.

The 513JAA000632BAG combines various features in a single package. It has a range of frequency options, and can be designed to operate at frequencies of 1 kHz to around 23 MHz. The device also contains two different selectable divider configurations and can provide clocks in either 2× or 4× mode. Finally, the device also allows for programmable waveform output, and will adjust itself to the desired waveform type.

The 513JAA000632BAG is popular in a variety of applications, most notably those related to communication systems. The device is typically used in equipment operating at medium frequencies, or at typical communication system operating frequencies such as 2.4 GHz, 5 GHz, and 10 GHz. The device is also used for controlling and providing the clock signal for signal processors, data storage, and analog-to-digital converters.

The main advantage of the 513JAA000632BAG is its ability to provide a range of frequencies, while still using the same device. This provides a cost-effective solution for providing clocking signals in a range of applications. Additionally, the device can be programmed to provide different waveform types, allowing the designer to customize its output. Finally, the device is relatively small, allowing it to be used in a variety of locations.

The 513JAA000632BAG is a versatile device that is able to produce several different frequencies, waveforms, and multiple selectable divider ratios that allow it to meet the requirements of multiple applications. The device is cost-effective and small, making it an ideal choice for a wide range of applications.

The working principle of the 513JAA000632BAG is based on a phase-locked loop (PLL) controller circuit. This circuit is responsible for producing the required frequency and waveform output. It works by locking onto a reference frequency and then generating output based on that reference. The output frequency is determined by the programming on the device as well as the reference frequency. The output waveform can be adjusted using on-chip programming.

The 513JAA000632BAG is a versatile device that can be used in a variety of applications. It is relatively small and cost-effective, but still has the capability to provide a range of frequencies and waveforms. The device uses a PLL controller circuit to generate its output based on a reference frequency, and is programmed using on-chip programming.

The specific data is subject to PDF, and the above content is for reference