5159909481193111LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DIN 41612 is a standardized connector which is widely used in the backplane of different systems within the electronics industry. It is often used for data bus interconnection and is suitable for fine-pitch combination. DIN 41612 connectors also have the advantage of being compatible with both parallel and serial data transfer, making them highly versatile for use in various types of applications.

The 5159909481193111LF model of the DIN 41612 backplane connector is a 6-pin version, with a mating pitch of 0.50mm. It features a low profile design, making it suitable for applications with limited space. The 5159909481193111LF can be used as a simple jumper for connecting two adjacent circuit boards, and is also an ideal solution for use when replacing existing backplanes. The pins are double plated for additional protection against shock and vibration, with a combination of plating characteristics.

Another advantage of the 5159909481193111LF backplane connector is that it can be used for a range of digital and analog signals. It features a built-in resistor and can handle an array of different connection modes. The connector is equipped with a contact resistance of 5mΩ max and an insulation resistance of 1000MΩ min. It is UL 94V-0 rated for a flammability rating.

The working principle of the 5159909481193111LF backplane connector is relatively simple. When the contact pads of the connector are mated with the receptacles of the substrate, they make a connection via the contacts. This connection shifts the signal from one side to the other in a reliable manner, allowing for reliable further transmission along the data bus. The connector meets IEC/UL standards and has been designed to support a wide range of digital and analog signals.

In conclusion, the 5159909481193111LF backplane connector is an excellent choice for many types of applications. Its low profile design is ideal for applications with limited space and it can handle a variety of digital and analog signals. Its built-in resistor provides stability and its pins are double plated for better protection from shocks and vibrations. The connector is compatible with both parallel and serial data transfer and can be used to replace existing backplanes. The working principle is relatively simple and it is a reliable and robust solution for data bus interconnection.

The specific data is subject to PDF, and the above content is for reference