515ECA200M000AAG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic devices that create a periodic or a repetitive waveform. The waveform could be a sine wave, a triangle wave, a sawtooth wave, or any other shape. They are used to generate signals, pulses, and waves of various frequency and shape. One such oscillator is the 515ECA200M000AAG.

This oscillator is suitable for applications such as clocks, crystal oscillators, TV broadcast, high-speed data communication, military electronics, and more. It features a very small footprint of only 3.3mm x 3.3mm, low standby current of 14µA at 4.5V,and a very small power consumption of less than 250mW. These features make it a great choice for space-constrained designs.

The 515ECA200M000AAG is an open Drain multi-modal oscillator that utilizes a C-MOS based technology for its working. It features an input frequency of either 32kHz or 250kHz, and can be operated at a different voltage range from 1.8V to 5V, or even higher. It has a start-up time of less than 0.5 seconds when operated in an open-loop mode.This allows it to be operated in very low-power applications.

The operating principle behind this oscillator is to force the plate of a parallel-resonant tank circuit to vibrate at the desired frequency. This is accomplished by applying an electric field to the circuit. The externally applied electric field creates a resonant frequency in the circuit, and the parasitic capacitance between the plate and ground forces the circuit to oscillate at its resonant frequency.

The 515ECA200M000AAG features a PLL (Phase-Locked Loop) circuit to maintain a very stable and accurate output signal. It utilizes a very low jitter PLL architecture with a selectable bandwidth to improve noise immunity and long-term reliability. The 515ECA200M000AAG also supports a temperature compensation feature to further reduce frequency variation with temperature. This feature allows the oscillator to provide very precise and stable output.

To sum up, the 515ECA200M000AAG oscillator is a very handy device for creating precise and stable waveforms with very low power consumption. It is suitable for applications such as clocks, crystal oscillators, TV broadcast, high-speed data communication, military electronics, and more. Its small size, and low standby current makes it ideal for space-constrained designs, and its features such as the PLL and the temperature compensation make it a great choice for accurate frequency generation.

The specific data is subject to PDF, and the above content is for reference