515MCB6M78000BAGR

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	22mA
Height - Seated (Max):	0.052" (1.33mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	29mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	±50ppm
Series:	Si515
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Enable/Disable
Frequency:	6.78MHz
Type:	VCXO
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Oscillators

An oscillator is an electronic circuit that produces an electrical signal of a specific frequency. This signal can be used to amplify various electronic signals or systems. There are several types of oscillator circuits, and each type has a different application and working principle. One of these oscillator circuits is the 515MCB6M78000BAGR.

Application Field of 515MCB6M78000BAGR Oscillators

The 515MCB6M78000BAGR oscillator is a low-cost and low-power device and can be used in a wide range of applications. One of the main applications of this oscillator is for data acquisition and transmission. It is widely used in industrial remote monitoring systems and can be used for the measurement of temperature, pressure, and other parameters. It can also be used in medical equipment, such as medical ventilators, and in automotive applications.

Working Principle of 515MCB6M78000BAGR Oscillators

The 515MCB6M78000BAGR oscillator works on the principle of feedback. The oscillator takes a signal from its input and amplifies it to produce an output. The output is then fed back to the input in a continuous loop. This process helps to maintain the signal frequency and allows it to remain at the same level. The 515MCB6M78000BAGR oscillator also uses an oscillator circuit that helps to generate a signal of a specific frequency. The oscillator can be used to provide a timing or control signal for other devices. It is also used to convert alternating current (AC) to direct current (DC), which is a process known as rectification. It can also be used for the synchronization of clock signals in various applications.

Conclusion

The 515MCB6M78000BAGR oscillator is an important component in many electronic systems and devices. It is used for the data transmission process in industrial remote monitoring systems, for medical applications such as ventilators, and for the synchronization of clock signals. It works on the principle of feedback and uses an oscillator circuit to produce a signal of a specific frequency. The 515MCB6M78000BAGR oscillator is a low-cost and low-power device and can be used in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description