51F-729-312 Allicdata Electronics
Allicdata Part #:

51F-729-312-ND

Manufacturer Part#:

51F-729-312

Price: $ 0.00
Product Category:

Filters

Manufacturer: API Technologies Corp
Short Description: FILTER LC(PI) 7000PF CHASSIS
More Detail: LC (Pi) EMI Filter 3rd Order Low Pass 1 Channel C ...
DataSheet: 51F-729-312 datasheet51F-729-312 Datasheet/PDF
Quantity: 1000
1 +: 0.00000
Stock 1000Can Ship Immediately
$ 0
Specifications
Current: 5A
Height: --
Size / Dimension: 0.156" Dia x 0.340" L (3.97mm x 8.64mm)
Package / Case: Axial, Bushing
Mounting Type: Chassis Mount
Voltage - Rated: 50V
Applications: General Purpose
Operating Temperature: --
ESD Protection: No
Values: C = 7000pF
Series: --
Resistance - Channel (Ohms): 0.01
Attenuation Value: 65dB @ 100MHz
Center / Cutoff Frequency: --
Number of Channels: 1
Technology: LC (Pi)
Filter Order: 3rd
Type: Low Pass
Part Status: Discontinued at Digi-Key
Packaging: Bulk 
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) filters are components used to reduce the effect of electric and radio signals on sensitive electrical equipment. The 51F-729-312 is an example of an EMI/RFI filter, and is used to reduce conducted and radiated emissions in sensitive electronics equipment.

EMI/RFI filters consist of two components – capacitors and inductors. These two components form an inductor-capacitor (LC) network. This type of network works by forming a frequency-dependent impedance, which reduces electric and radio signals at certain frequencies. These filters are designed to minimize the effect of electric and radio signals on sensitive electrical equipment, while allowing normal operation.

The 51F-729-312 is a three-terminal EMI/RFI filter. It is designed for use on AC and DC power lines, where low-frequency and lower harmonic frequencies may occur. The filter is composed of three components – three inductors and two capacitors. The inductors and capacitors are arranged in a series-shunt configuration, which allows the filter to provide both common-mode and differential-mode filtering. The filter also has a high common-mode impedance, providing greater attenuation of unwanted frequencies.

The 51F-729-312 filter is designed to reduce conducted and radiated emissions for systems operating at frequencies up to 5 MHz and below. The filter is also designed to reduce the effect of transients and surges in power lines. The filter can also be used to reduce EMI and RFI interference on signal and control lines. In addition, the filter can be used for interference suppression in a wide range of applications, including broadcast, telecommunications, automotive, consumer, medical, and industrial applications.

In summary, the 51F-729-312 is an example of an EMI/RFI filter. The filter is composed of three components – three inductors and two capacitors arranged in a series-shunt configuration. The filter is designed to reduce conducted and radiated emissions for systems operating at frequencies up to 5 MHz and below, and can be used in a wide range of applications. By reducing electric and radio signals, the filter helps protect sensitive electrical equipment from the damaging effects of EMI and RFI interference.

The specific data is subject to PDF, and the above content is for reference

Latest Products
NFM21HC101U1H3D

FILTER LC HIGH FREQ 100PF 0805LC (T-Type...

NFM21HC101U1H3D Allicdata Electronics
CM1622-08DE

FILTER RC(PI) 100 OHM/12.5PF SMDRC (Pi) ...

CM1622-08DE Allicdata Electronics
M15733/33-0002

FILTER LC(PI) 1750PF CUSTOMLC (Pi) EMI F...

M15733/33-0002 Allicdata Electronics
4700-056M

FILTER LC(PI) 0.1UH/5000PF SMDLC (Pi) EM...

4700-056M Allicdata Electronics
MEA2010LC220

FILTER LC 22PF 210MHZ SMDLC EMI Filter 2...

MEA2010LC220 Allicdata Electronics
AOZ8175DI

FILTER RC(PI) 100 OHM/8PF SMDRC (Pi) EMI...

AOZ8175DI Allicdata Electronics