51UAD-T16-D15L

Temperature Coefficient:	±1000ppm/°C
Mounting Type:	Panel Mount
Bushing Thread:	M7 x 0.75
Actuator Diameter:	0.157" (3.99mm)
Actuator Length:	0.630" (16.00mm)
Actuator Type:	Slotted
Termination Style:	PC Pins
Resistive Material:	Conductive Plastic
Adjustment Type:	Side Adjustment
Rotation:	290°
Number of Turns:	1
Series:	Pro Audio 51
Power (Watts):	0.25W, 1/4W
Built in Switch:	None
Number of Gangs:	1
Tolerance:	±20%
Resistance (Ohms):	10k
Taper:	Logarithmic
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rotary Potentiometers are a type of variable resistor used to detect or adjust the position of a shaft or slide. Their main use is to measure angular position and speed. Rheostats are also variable resistors, but they are used to control electrical current.The 51UAD-T16-D15L is a rotary potentiometer that is typically used in a wide variety of applications. It is a 15-pin device, with two independent linear 10K Ohm potentiometers and a 16-position switch.The first potentiometer is used to measure the angle of rotation of the shaft. This can be used to measure the angle of a steering wheel or the angular position of a robotic arm. The second potentiometer is used to measure the speed at which the shaft is rotating. When combined with the switch, it can be used to measure the speed at which a motor is operating.The 16-position switch is used to set the amount of current or voltage being supplied to the device. This is used to set the maximum speed of the motor, or the maximum angle of rotation for the shaft. It also allows the device to be used in applications where the current or voltage levels need to be adjusted.The 51UAD-T16-D15L is a highly efficient and reliable rotary potentiometer. It is designed to be used in extreme temperature and vibration environments, making it suitable for a variety of applications.To work properly, the 51UAD-T16-D15L must be connected to a suitable power supply. The supply voltage should be between 5V and 18V, and it must be capable of supplying at least 500mA of current. It also requires a ground connection.The 51UAD-T16-D15L is usually connected to a microcontroller, such as an Arduino or Raspberry Pi. The microcontroller can read the angles and speeds measured by the potentiometers, and can use the switch to control the current or voltage being supplied to the device.In conclusion, the 51UAD-T16-D15L is an efficient and reliable rotary potentiometer that is suitable for a wide variety of applications. It is designed to operate in extreme temperature and vibration environments, and its two independent linear 10K Ohm potentiometers and 16-position switch make it a very versatile device.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description