Frequency Stability:	±2ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.098" L x 0.079" W (2.50mm x 2.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	2.5mA
Operating Temperature:	-30°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	520
Voltage - Supply:	2.8V
Output:	Clipped Sine Wave
Function:	--
Frequency:	40MHz
Type:	VCTCXO
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: 520T20DA40M0000 Application Field and Working Principle

Introduction

Oscillators are electronic circuits which generate a periodic signal, usually an alternating current (AC) signal. They are widely used in many electronic devices such as radios, television sets, computers, and even in some industrial systems. 520T20DA40M0000 is a type of oscillator which has extensive application fields and a distinct working principle.

Application Field

520T20DA40M0000 oscillator can be applied in multiple radio-frequency (RF) systems, such as wireless networks and satellite communication systems, for various purposes like modulation, demodulation, and signal filtering. The device typically operates in the frequency range of 20-2,000MHz, thus providing a wide range of application possibilities.In general, 520T20DA40M0000 oscillator is used within different systems to achieve the stable output power over a wide frequency range. This device can also be used to provide a stable power reference to a power amplifier under varying environmental conditions. Moreover, 520T20DA40M0000 oscillator is employed in various consumer electronics, including modern television sets and set-top boxes. In some systems, this device is used as a signal generator to provide a perceivable output that can be observed on a monitor.

Working Principle The underlying working principle of a 520T20DA40M0000 oscillator is based on an active feedback network. This circuit consists of active devices such as transistors and diodes which are connected in a predetermined configuration. The output signal of the circuit is fed back to its input while additional components are used to tune the operating frequency and other qualities. The input signal of the circuit is typically a direct current (DC) signal of constant voltage and frequency. The active components of the circuit (transistors and diodes) convert this signal to an alternating current (AC) signal, which is then amplified. This amplified signal is then sent to the feedback network, where it is compared to the original input signal. Any difference between the two signals is then used to control the active components of the circuit to generate an output signal of desired frequency. The output signal of the 520T20DA40M0000 oscillator is typically a sine wave or triangular wave form of the predetermined frequency. The output frequency of the circuit can be adjusted by varying the resistance or capacitance of its component elements. In addition, the output power of the device can also be varied without impacting its performance.

Conclusion

520T20DA40M0000 oscillator is an important type of device that is widely used in different electronic and communication systems for providing a stable and reliable output signal. This device typically operates in the frequency range of 20-2,000MHz and can be used for various purposes such as modulation, demodulation, and signal filtering. The working principle of such an oscillator is based on an active feedback network comprising of active components like transistors and diodes. As such, the 520T20DA40M0000 oscillator has a wide range of use and is essential for a variety of radio-frequency (RF) system applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description