Series:	50-CBS
Packaging:	Bulk
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.500" (12.70mm)
Length - Overall:	0.750" (19.05mm)
Width - Overall:	0.500" (12.70mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

RF shields, also known as radio frequency shields, are designed to block or reduce the amount of radio frequency energy from entering or exiting a designated area. RF shields help to protect people, equipment, and the environment from the dangers associated with radiofrequency waves. The type of shield used and the type of radiation being shielded against will determine the amount of attenuation and the level of protection from the radiation. The 52NN-CBSA-0.5X0.75X0.5 is a type of RF shield that is used to block or reduce the amount of radio frequency energy.

Application field and Working principles

The 52NN-CBSA-0.5X0.75X0.5 RF Shield is designed for use in a variety of applications. Some applications of the 52NN-CBSA-0.5X0.75X0.5 shield include, but are not limited to, the following:

• Radiation shielding for medical and commercial imaging equipment
• Radiation shielding for research laboratories
• Radiofrequency emitting devices such as cell phones
• Energy Efficient Environments (EEE)

The 52NN-CBSA-0.5X0.75X0.5 RF shield consists of two layers, a conductive layer and a nonconductive layer. The conductive layer is a shield that is designed to stop radiation from entering or leaving the area that is being protected. The nonconductive layer provides a layer of insulation against the radiation, which helps to reduce the amount of radiation that is passed through the shield.

The shield has a high shielding effectiveness and is designed to block out radio frequency signals. It has been tested by the FCC and meets their standards for RF shielding. The 52NN-CBSA-0.5X0.75X0.5 RF shield has a low insertion loss, which means that it is very efficient at redirecting RF waves away from the desired area. The shield will not interfere with other frequencies that are traveling through it, ensuring that only the desired frequency is being blocked or reduced.

Conclusion

The 52NN-CBSA-0.5X0.75X0.5 RF Shield is an effective shielding solution for protecting people and equipment from the dangers of radio frequency radiation. It is a highly efficient shield that is designed to block or reduce the amount of radio frequency energy entering or leaving a designated area. The nonconductive layer provides additional insulation, which helps to reduce the amount of RF radiation that is passed through the shield. The shield has also been tested by the FCC and meets their standards for RF shielding. This makes the 52NN-CBSA-0.5X0.75X0.5 shield an ideal choice for a variety of applications, including medical and commercial imaging equipment, research laboratories, and radiofrequency emitting devices.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description