| Allicdata Part #: | 530BA32M0000DGR-ND |
| Manufacturer Part#: |
530BA32M0000DGR |
| Price: | $ 5.31 |
| Product Category: | Crystals, Oscillators, Resonators |
| Manufacturer: | Silicon Labs |
| Short Description: | SINGLE FREQUENCY XO, OE PIN 2 (O |
| More Detail: | 32MHz XO (Standard) LVDS Oscillator 3.3V Enable/Di... |
| DataSheet: |  530BA32M0000DGR Datasheet/PDF |
| Quantity: | 1000 |
| 250 +: | $ 4.77688 |
| Frequency Stability: | ±50ppm |
| Current - Supply (Disable) (Max): | 75mA |
| Height - Seated (Max): | 0.071" (1.80mm) |
| Size / Dimension: | 0.276" L x 0.197" W (7.00mm x 5.00mm) |
| Package / Case: | 6-SMD, No Lead |
| Mounting Type: | Surface Mount |
| Ratings: | -- |
| Current - Supply (Max): | 98mA |
| Operating Temperature: | -40°C ~ 85°C |
| Absolute Pull Range (APR): | -- |
| Series: | Si530 |
| Voltage - Supply: | 3.3V |
| Output: | LVDS |
| Function: | Enable/Disable |
| Frequency: | 32MHz |
| Type: | XO (Standard) |
| Base Resonator: | Crystal |
| Part Status: | Active |
| Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators are electronic components that generate electrical signals with certain frequency and amplitude, which are used for synchronization and control in many electronic systems. One type of oscillator is the 530BA32M0000DGR, an integrated circuit specifically designed for use in the consumer electronics market. In this article we will discuss the application field and working principle behind this oscillator.
Application Field
The 530BA32M0000DGR oscillator is designed for use in consumer electronics applications such as TVs, DVD players, and audio systems. Its low-frequency voltage output can be used as a timebase signal for synchronization of video and audio components within these consumer electronics equipment. It can also be used as a signal generator for test and measurement applications, or as a modulated signal source for radio transmitters.
Working Principle
The working principle of the 530BA32M0000DGR oscillator is based on the oscillatory behavior of a LC circuit. A LC circuit consists of an inductor and a capacitor, which are connected in series or in parallel to form a closed circuit. When a voltage is applied to the circuit, the capacitor will be discharged and the inductor will be charged, creating a self-sustaining oscillatory behavior. This oscillation is generated by a feedback loop, which sets up a repetitive cycle in which energy is passed back and forth between the inductor and the capacitor. The oscillator uses this feedback loop to generate a waveform with a certain frequency and amplitude.
The 530BA32M0000DGR oscillator is a CMOS integrated circuit that contains transistors, resistors, capacitors and inductors on its chip. The chip generates the oscillatory behavior of the LC circuit using a combination of the transistors, resistors, and capacitors. The inductor is built directly onto the integrated circuit, while the output terminal is connected to the capacitor. The frequency of the output signal is determined by the value of the inductor and capacitor, as well as the design of the transistors used in the integrated circuit.
Conclusion
The 530BA32M0000DGR oscillator is a useful component for consumer electronics and measurement applications. Its low-frequency voltage output can be used as a timebase signal for synchronization of video and audio components, or as a signal generator for test and measurement purposes. It is also suitable for use in radio transmitters as a modulated signal source. The chip uses a combination of transistors, resistors, capacitors and an inductor to generate an oscillatory behavior that produces a waveform with a certain frequency and amplitude.