530BC10M0000DGR

Frequency Stability:	±7ppm
Current - Supply (Disable) (Max):	75mA
Height - Seated (Max):	0.071" (1.80mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	98mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	Si530
Voltage - Supply:	3.3V
Output:	LVDS
Function:	Enable/Disable
Frequency:	10MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to the 530BC10M0000DGR Oscillator

Oscillators are electronic devices used to generate a periodic waveform, such as sine or square waves. The 530BC10M0000DGR Oscillator is a miniature, high frequency oscillator used in applications requiring tight frequency stability and low noise. This oscillator operates at frequencies from 0.25 MHz to 10 MHz and provides high immunity to Digital Radio Frequency Interference (DRFI).

Applications of the 530BC10M0000DGR Oscillator

The 530BC10M0000DGR Oscillator is often used in automation and control applications where frequency stability and low noise areimportant. Some varied applications include:

• Medical equipment
• Telecommunications
• Signal processing
• Test and measurement equipment
• Instrumentation
• Military radar systems
• Consumer electronics

How the 530BC10M0000DGR Oscillator Works

The 530BC10M0000DGR Oscillator is a type of Pierce-type oscillator, which is an electrical circuit designed to produce a stable, high frequency signal output. It provides a low phase noise at frequencies up to 10 MHz, with ±1 ppm of initial accuracy and better than ±1 ppmof frequency stability over temperature. It consists of two inputs, a feedback signal input and a reference signal input, and two outputs, a high impedance output and a low impedance output.The reference signal input sets the oscillation frequency, and in order to be stable the oscillation frequency must be within a certain range of the reference signal frequency. The feedback signal is the output from the oscillator and is fed back into the input of the oscillator, thereby correcting the oscillations to ensure stability.

Conclusion

The 530BC10M0000DGR Oscillator is a miniature, high frequency oscillator that provides a low phase noise and excellent frequency stability over temperature. It is used in a variety of applications, including medical equipment, telecommunications, signal processing, test and measurement equipment, instrumentation, military radar systems, and consumer electronics. It is a type of Pierce-type oscillator, which consists of two inputs and two outputs, and is able to operate at frequencies from 0.25 MHz to 10 MHz.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description