530EA312M500DGR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuits used to produce a repetitive cycle of constant frequency and magnitude electrical signals, which are used to control or measure the frequency of a periodic waveform. The most common type of oscillator is the 530EA312M500DGR Oscillator.

The 530EA312M500DGR Oscillator is a dual-gate oscillator designed to produce a stable and precise oscillation frequency. It is composed of two key components: a quartz crystal resonator and a current-biased L-C (inductor-capacitor) circuit. A symmetric L-C oscillator provides the basic frequency of the oscillator, while the quartz crystal provides precise frequency control. The oscillator is then modified by the addition of a dual-gate logic input, which is used to adjust the oscillation frequency.

The 530EA312M500DGR Oscillator is widely used in applications where precise frequency control is required. It is commonly used in data communications protocols, such as GSM and CDMA, where transmission requires accurate timing. It is also used in process control applications and for synchronization of digital clocks. In addition, the oscillator can be used as a frequency reference in many measuring applications, such as frequency counters.

The 530EA312M500DGR Oscillator has a wide operating temperature range from -20°C to +85°C, allowing it to be used in a wide range of environments. It is designed with a high stability and low polarization rate, making it suitable for use in precision frequency applications. In addition, its design makes it suitable for use with both logic-level and digital-level signals, allowing it to be used in a variety of applications.

The working principle of the 530EA312M500DGR Oscillator is based on a specific type of resonator: the quartz crystal. The quartz crystal is composed of quartz silica that has a natural ability to vibrate at a very specific frequency when a voltage is applied to it. In the oscillator, the quartz crystal is connected to an inductor and capacitor, forming an L-C circuit. When a voltage is applied to the quartz crystal, the crystal vibrates at its resonant frequency, and the L-C circuit amplifies the signal. This amplified signal is then fed back to the quartz crystal, sustaining the oscillation.

The 530EA312M500DGR Oscillator can be tuned to a precise frequency using an external voltage source. The voltage source can be used to adjust the voltage applied to the quartz crystal, thereby fine-tuning the frequency. This enables precise frequency control for applications requiring accurate timing.

The 530EA312M500DGR Oscillator is a reliable and precise frequency control device that is widely used in a variety of applications. Its wide operating temperature range and high stability make it suitable for use in precision frequency applications, such as data communications protocols, process control, synchronization of digital clocks, and frequency measurement.

The specific data is subject to PDF, and the above content is for reference