530EC106M250DGR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are devices that generate an alternating or periodic signal, like a sinusoid voltage, power, or audible sound. They are commonly used in electronic circuits to maintain a particular frequency or provide timing signals. Although the oscillators may appear complicated and elaborate, they are actually quite basic elements of digital and analog electronic systems.

One type of oscillator is the 530EC106M250DGR oscillator, and it is used as an Atmel ATmegas MCU compatible oscillator in order to provide a stable frequency output at 8MHz. The device is a cost-effective, low-power oscillator with an enabled output enable input.

Application Field

The 530EC106M250DGR oscillator is used in a variety of applications. It can be used as a clock circuit or timing device in embedded systems, microcontrollers and digital integrated circuits. The oscillator is also suitable for use in automotive applications, power management systems, and consumer electronics devices. Additionally, the device can be used as an on-chip oscillator in microcontrollers, particularly Atmel Atmegas MCUs.

Working Principle

The 530EC106M250DGR oscillator works on the principle of establishing a negative feedback loop between two circuit blocks. In this case, the two circuit blocks are a capacitor and an amplifier. In the first circuit block, the capacitor is charged and discharged according to a predetermined frequency, while in the second circuit block the amplifier amplifies the signal produced by the capacitor, thereby providing a stable output frequency.

The 530EC106M250DGR oscillator also utilizes a standard RC network as part of its feedback loop. As the capacitor within the RC network is charged and discharged, the frequency of the oscillator is also determined. This type of oscillator is known as an RC oscillator, as it relies on the RC network to provide an appropriate frequency output.

The 530EC106M250DGR oscillator also utilizes an External Enable input. This is a pin used to control the output of the oscillator, and its purpose is to shut the oscillator off or enable the output. This is important for applications which require precise timing, as the enable input ensures that the output of the oscillator is only enabled or disabled when required.

Overall, the 530EC106M250DGR oscillator is a cost-effective, low-power oscillator suitable for a range of applications. Its ability to produce a stable frequency output at 8MHz makes it an ideal choice for embedded systems, microcontrollers, digital integrated circuits, and automotive applications.

The specific data is subject to PDF, and the above content is for reference