530FB148M500DGR

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	75mA
Height - Seated (Max):	0.071" (1.80mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	98mA
Operating Temperature:	-40°C ~ 85°C
Absolute Pull Range (APR):	--
Series:	Si530
Voltage - Supply:	2.5V
Output:	LVDS
Function:	Enable/Disable
Frequency:	148.5MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Oscillators and 530FB148M500DGR

Oscillators are electrical circuits which have a specific frequency of output. Their applications range from creating sound in consumer electronics to several industrial uses. The frequency range depends on the configuration of the oscillator circuit. As one of the most fundamental electrical components, they are used to create a sine wave output and can also be used as a timekeeping device. They are used in consumer electronics devices, radio transmitters, and receivers. The 530FB148M500DGR is a high-frequency oscillator designed for use in audio and video systems. It is a commonly used type of oscillator, also known as an "RC oscillator", because it uses an RC (resistor-capacitor) circuit. The 530FB148M500DGR is a four-pin oscillator with a ceramic package, designed to generate stable, low-noise signals at frequencies ranging from 400 KHz to 500 MHz. It has a low power consumption, and is designed for broadband applications.

Components of 530FB148M500DGR

The 530FB148M500DGR consists of a resistor, capacitor, and an oscillator circuit. The resistor is used to control the frequency of the output signal, while the capacitor is used to store and discharge energy. The oscillator circuit is a combination of some type of active component, such as a transistor or an operational amplifier, and some type of feedback loop that feeds the output signal back into the input. This circuit configuration creates an oscillating signal, that is, the output signal has a consistent frequency and amplitude with minimal deviation from the desired output. The 530FB148M500DGR also contains an integrated inductor, which is designed to help reduce the noise of the signal output. By using an integrated inductor, it reduces the amount of oscillator noise, resulting in a cleaner output signal.

Applications of 530FB148M500DGR

The 530FB148M500DGR is ideally suited for a wide variety of applications, including consumer electronics, broadcast and communications equipment, medical diagnostics, industrial process control, and more. It can also be used in high-frequency applications such as spread spectrum radios, cellular telephones, and satellite communications. It is also suitable for use in computer peripheral devices, digital cameras, and other digital devices.

Working Principle of 530FB148M500DGR

The working principle of the 530FB148M500DGR is to create a sine wave output with low frequency stability and low noise. The resistor and capacitor are connected to the oscillator circuit, and the integrated inductor helps reduce the noise output. When the oscillator is operational, the electrical energy is passed through the resistor, capacitor, and inductor. The resistor determines the frequency of the sine wave output by controlling the flow of the energy. The capacitor acts as a filter, providing a steady and stable flow of energy to the circuit, while the inductor helps reduce or filter out any unwanted noise. Once the energy has been filtered and controlled, it is output as a sine wave. The output signal will have a consistent amplitude and frequency, which is determined by the resistor. Since the oscillator circuit is constantly self-adjusting, the output waveform is stable, without any large deviations.

Conclusion

The 530FB148M500DGR is a versatile and reliable oscillator designed for use in a wide range of applications, from consumer electronics to communications and industrial systems. It is capable of producing stable, low-noise sine wave outputs at multiple frequencies, ranging from 0.4 to 500 MHz. The 530FB148M500DGR consists of a resistor, capacitor, integrated inductor, and an oscillator circuit, all of which work together to create a stable and efficient sine wave signal.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description