530SC175M000DGR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are used to create electronic signals which fluctuate between high and low states. A 530SC175M000DGR oscillator is a quartz crystal oscillator that is designed to provide an accurate and stable frequency source for frequency control and timing applications. The quartz crystal that is used in the 530SC175M000DGR oscillator utilizes the natural frequency of a quartz crystal to provide a stable and accurate output.

The 530SC175M000DGR oscillator is based on the AT-cut quartz crystal design, which has a well-defined resonance frequency of 175MHz. This makes it suitable for a number of applications including low-noise analog and digital receivers, frequency synthesizers, and modulation control systems. The quartz crystal oscillator has a frequency range of approximately 0.5 to 2000MHz, making it ideal for a variety of general-purpose applications.

The 530SC175M000DGR oscillator is designed to maintain a stable frequency over temperature. The oscillator utilizes a feedback amplifier design which incorporates a PLL circuit to increase its stability. The oscillator is designed to provide a low noise output signal, with a maximum frequency deviation of 0.05%. The output signal has a typical output power of 7dBm.

The 530SC175M000DGR oscillator can be used for a variety of applications, including radio frequency (RF) components, automotive applications, industrial applications, medical imaging systems, and telecom systems. It can also be used in communication systems, such as cell phones and wireless networks. The oscillator is also used in test equipment, such as signal analyzers and frequency counters.

The main working principle of the 530SC175M000DGR oscillator is based on the quartz crystal resonator. The quartz crystal has a natural resonance frequency which is determined by its physical attributes. The quartz crystal is fed with an alternating current which causes it to vibrate with its natural resonance frequency. This vibration is used to create an oscillator circuit which produces an output signal at the same frequency as the resonant frequency of the quartz crystal.

The output signal from the oscillator is a sine wave signal, with a waveform that is similar to a tuning fork. The frequency of the output signal is determined by the properties of the quartz crystal as well as the frequency of the alternating current that is used to drive it. The output signal from the 530SC175M000DGR oscillator is stable and accurate, and can be used for a variety of applications.

The specific data is subject to PDF, and the above content is for reference