532BC000926DGR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable Oscillators are a type of integrated circuits that contain an oscillator and a varactor diode. They are used to generate an oscillatory signal at a specific frequency. The frequency can be selected by using external pins on the integrated circuit. The oscillator is typically an integrated circuit (IC) device that includes an amplifier and a resistor-capacitor (RC) network connected to it. The varactor diode is connected to the oscillator and acts as a voltage-controlled capacitor. By adjusting the voltage across the varactor diode, the frequency of the oscillator can be varied.

The 532BC000926DGR is a Pin Configurable/Selectable Oscillator which incorporates a voltage-controlled oscillator and a varactor diode. It is a compact IC package with a size of 8x8x2.2mm. It offers a frequency range of 10 kHz to 166MHz, with a supply voltage range of 1.8V to 5.0V, and an operational temperature range of -40°C to +85°C. It is suitable for use in a wide range of applications, including telecommunications, automotive, industrial automation, medical equipment, and consumer electronics.

The main advantage of the 532BC000926DGR is its ability to be easily programmed to a variety of different frequency ranges. By using special pins on the IC, the frequency can be changed to the desired value. The frequency select pins can be programmed to select one of a predetermined range of frequencies. This allows for a more flexible and cost-effective oscillator solution for a wide range of application.

The working principle of the 532BC000926DGR is based on the voltage-controlled oscillator (VCO) circuit. The external pins allow for the selection of the operating frequency. The internal capacitors and resistors form an RC network which determines the frequency of the oscillator. The voltage-controlled resistor is used to control the frequency of the oscillator. The output signal of the oscillator is composed of a sine wave, square wave, or sawtooth waveform, depending on the application.

In summary, the 532BC000926DGR is a Pin Configurable/Selectable Oscillator which offers a frequency range of 10kHz to 166MHz, with a supply voltage range of 1.8V to 5.0V, and an operational temperature range of -40°C to +85°C. It is suitable for a wide range of applications, and its frequency can be selected using special pins on the IC. It is based on the voltage-controlled oscillator (VCO) circuit, whose frequency is controlled by a varactor diode. The output signal can be a sine wave, square wave, or sawtooth waveform. As such, the 532BC000926DGR is the perfect choice for a range of applications.

The specific data is subject to PDF, and the above content is for reference