532FC000906DGR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 532FC000906DGR is classified as a pin configurable/selectable oscillator. An oscillator is a device used to generate a continuous periodic signal by alternating between high and low values. The oscillator is designed to be used in a variety of applications, ranging from communications to aerospace. The 532FC000906DGR is designed to provide electrical insulation from surrounding components and also provides a high degree of frequency stability over a wide temperature range.

The 532FC000906DGR has a unique design that allows for pin and command selection of output frequency and logic level. On the device there are two double-pole-double-throw (DPDT) switches that are used to apply voltage or current levels to the oscillator\'s pins. An external supply voltage is used to determine the switching levels of the DPDT switches.

When the supply voltage is high, the current is supplied to the oscillator\'s output pins and the oscillator switches to the desired frequency. When the supply voltage is low, the current is disconnected from the output pins and the oscillator switches back to its "idle" state.

The 532FC000906DGR is designed to operate over a supply voltage range of 1.8 to 5.5V and a frequency range of 1.0MHz to 200MHz. The device also features a power-down mode in which the oscillator stops running and disconnects the output pins. This allows the device to be powered down to save on overall power consumption.

The 532FC000906DGR is also designed to be used in combination with a voltage-controlled oscillator (VCO). A VCO is a circuit that uses a voltage as the controlling factor for its frequency output. The 532FC000906DGR is designed to operate in conjunction with a VCO and can be controlled using the external supply voltage. This allows for greater flexibility in terms of output frequency selection.

In addition to its use as a pin and command selectable oscillator, the 532FC000906DGR can also be used as a "watchdog" timer. Watchdog timers are used to reset a computer system in the event that a system error occurs. The 532FC000906DGR can be configured such that it will reset the system after a specified time period if there is no user input.

The 532FC000906DGR is a versatile and feature-rich pin configurable/selectable oscillator that can be used in a variety of applications. The device is designed to provide precise, temperature compensated frequency output and can be used to provide precise and repeatable timing signals. The device is also designed to provide a precise reset signal in the event of a system error, as well as providing precise control over frequency and logic level output.

The specific data is subject to PDF, and the above content is for reference