533AA000045DGR

Function:	Enable/Disable
Current - Supply (Disable) (Max):	75mA
Package / Case:	6-SMD, No Lead
Height:	0.071" (1.80mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Current - Supply (Max):	121mA
Operating Temperature:	-40°C ~ 85°C
Frequency Stability:	±50ppm
Voltage - Supply:	3.3V
Output:	LVPECL
Series:	Si533
Frequency - Output 4:	--
Frequency - Output 3:	--
Frequency - Output 2:	106.25MHz
Frequency - Output 1:	212.5MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable / Selectable Oscillators

Pin configurable/selectable oscillators are electronic components used to produce a periodic signal, usually a sine wave in the form of an AC waveform. The 533AA000045DGR is a type of oscillator that is designed to generate a precise output frequency with minimal variation. It is suitable for application in clocks, diagnostic systems, process controllers, and other systems that require a precise, stable frequency.

Overview

The 533AA000045DGR oscillator is a pin-configurable device, meaning it can be set up to generate an output frequency depending on the configuration of its pins. It has three operating modes: off, digital, and analog - each of which works differently and are described in detail below. The digital mode requires only a few pins for configuration and is capable of controlling the oscillator frequency with an accuracy of 4ppm. The analog mode requires more pins for configuration and is capable of providing higher precision with an accuracy of up to 2ppm.

Functionality

The 533AA000045DGR oscillator has three operational modes: off, digital and analog. In off mode, no signal is generated by the oscillator and all its pins are inactive. In digital mode, the oscillator is controlled by a clock pulse and the frequency can be adjusted by changing the number of ON and OFF high voltage pulses. This mode is suitable for applications that require an exact output frequency. Finally, in analog mode the frequency output is adjusted using a voltage control input, allowing more fine-grained control over the output frequency. This mode is ideal for applications that require frequency accuracy of up to 2ppm.

Use Cases

The flexible and precise output of the 533AA000045DGR oscillator makes it suitable for a wide range of applications. In clocks and timers, the oscillator can be used to precisely measure time intervals. It is also ideal for process controllers, where the ability to adjust the frequency precisely is paramount. In diagnostic systems, the oscillator can be used to measure the exact characteristics of a system and allow for more precise data collection. Finally, it is also suitable for communications systems, where it can be used to generate a stable carrier wave for transmission.

Conclusion

The 533AA000045DGR oscillator is a pin-configurable device that is capable of producing accurate, stable frequencies with minimal variation. It is suitable for a wide range of applications, and its three operating modes allow for greater customization and control of the frequency output. Its flexibility and accuracy make it a great choice for any system that require precise frequency control.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description