534AA002417DG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable Oscillators offer precise, reliable digital and RF/microwave frequencies for a variety of applications. One of the most common uses of this type of oscillator is to provide precise frequency control and stable clocks for system-on-chip devices, micro-controllers and other integrated circuits. The 534AA002417DG is a pin configurable/selectable oscillator that provides a range of different frequency ranges and output levels.

The 534AA002417DG is a compact, surface mount device designed to provide precise, reliable and stable frequencies from 6.144 MHz to 75.000 MHz in 0.125MHz increments. It is also capable of providing supply voltages (VDD), oscillator frequency (FOUT) and logic enable input (EN) signals for system-on-chip devices, micro-controllers and other integrated circuits.

The oscillator is available in three different families – the 534AA002417DG, 534AA002417DD and 534AA002417UG. Each family has a unique output frequency range, pin-out and operating characteristics. The 534AA002417DG is the smallest of the three families and has the lowest operating frequency. It has a low GND current of 2mA and supports 2.5V to 3.3V voltage input range.

The 534AA002417DG has five output pieces of information about the Output Typical Frequency Response for the pin configurable/selectable oscillators. It consists of Frequency Range, Output Level, Rise/Fall Time, Pullability, and Jitter. These pieces of information tell us how the oscillator behaves when it is working under different operating conditions. Frequency Range describes the frequency range the oscillator is capable of producing, while Output Level describes the output level of the oscillator at the given frequency. The Rise/Fall Time shows the time it takes for the oscillator to transition from one frequency to another. Pullability shows the amount of pulling that can be done to change the frequency of the oscillator and Jitter describes how much variation is present in the output waveform.

The 534AA002417DG can also be used as a clock source in applications that require a stable, accurate frequency. It can be used in consumer electronics, automotive, industrial and medical applications. Additionally, it is capable of providing precision oscillation for high end commercial telecommunication systems.

The working principle of the 534AA002417DG pin configurable/selectable oscillator is fairly simple. It is designed to accept an enable/disable command in the form of a logic input signal. When the logic input is turned on (i.e. logic 1), the oscillator is set to the chosen frequency, which is determined by the pin configuration. The oscillator circuit then begins its oscillation cycle, which can last indefinitely or until the enable/disable command is turned off.

The 534AA002417DG pin configurable/selectable oscillators are used in a variety of applications across many industries and have proven to be reliable and consistent performance. Whether it is an application requiring precise frequency control, or a robust clock source in a commercial system, this type of oscillator provides a reliable and accurate solution.

The specific data is subject to PDF, and the above content is for reference