534BB000553DG

Function:	Enable/Disable
Current - Supply (Disable) (Max):	75mA
Package / Case:	8-SMD, No Lead
Height:	0.071" (1.80mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Current - Supply (Max):	98mA
Operating Temperature:	-40°C ~ 85°C
Frequency Stability:	±20ppm
Voltage - Supply:	3.3V
Output:	LVDS
Series:	Si534
Frequency - Output 4:	100MHz
Frequency - Output 3:	75MHz
Frequency - Output 2:	50MHz
Frequency - Output 1:	25MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable OscillatorsOscillators are electronic components used to change or control the frequency of a signal output. They are invaluable when precision timing or higher frequencies are needed or when the signal needs to be synchronized with other circuits. Pin Configurable/Selectable Oscillators can provide faster time-to-market solutions and significantly reduce development time and cost.The 534BB000553DG is an example of a Pin Configurable/Selectable Oscillator from Crystal EMI/RFI that meets the needs of applications such as handsets and PDA’s. This triple-function oscillator is a flexible solution that enables control and synchronization of signals in high frequency and precision timing applications. It allows the selection of various frequencies in discrete steps, with a frequency that can be set up to a minimum of 14kHz.The main features of the 534BB000553DG are its wide frequency range, low noise, and low power consumption. It provides robust operation as it has excellent frequency stability over a wide temperature range and offers excellent long-term reliability.The oscillator features a 6-pin package that is easy to mount and wire. The first three pins of the package control the oscillator frequency; the fourth pin is a frequency adjust pin, the fifth pin is a selectable frequency adjust pin, and the sixth pin is a ground reference. It also has a power supply that can be selected to optimize efficiency.The general working principle of a pin-configurable oscillator is relatively simple. The signal input is supplied to the first three pins of the package, through an external frequency adjust pin, and through a selectable frequency adjust pin. These signals are then mixed together with a voltage reference, and the resulting signal is then sent to the output pin.The output frequency can be adjusted by the resistors connected to the frequency adjust pins. The resistors affect the duty cycle of the signal, causing it to vary until the desired frequency is obtained. In addition to providing the ability to vary the frequency, the selectable frequency adjust pin allows for the selection of different modes or frequencies.The 534BB000553DG pin-configurable oscillator is designed to provide a robust, low-cost solution for applications such as handsets and PDA’s. It offers excellent precision timing and speeds up the time-to-market for development projects. With its wide frequency range and low current consumption, it can be reliably used in situations that require higher frequencies or precision timing.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description