535AB000335DGR

Oscillators

An oscillator is a device that generates periodic electrical signals. Electrically, it consists of an amplifier and an LC circuit connected in a loop. It is the combination of an amplifier and a tuned circuit which causes the loop gain to be just greater than one and thus allow the circuit to oscillate. Oscillators are widely used in electronic equipment and are classified according to their frequency and application. One type is the 535AB000335DGR oscillator, which is used in a variety of electronic applications.

Application Field

The 535AB000335DGR oscillator is a high-frequency oscillator that is commonly used in RF applications. It is designed to provide a stable frequency output up to 150MHz and is often used in communication systems, such as wireless communications. It can also be used in GPS systems, RF antennas, and other signal processing applications.

Working Principle

The 535AB000335DGR oscillator uses a PLL (Phase Locked Loop) circuit to generate an accurate frequency. The PLL circuit consists of an amplifier, a voltage controlled oscillator (VCO), and a frequency divider. The amplifier drives the VCO, which produces a frequency signal that is divided by the frequency divider. The output of the divider is compared with the reference frequency signal. When the two signals are in phase, the PLL is stable and produces an output frequency with an accuracy determined by the reference frequency.

The 535AB000335DGR oscillator has both low-jitter and low-noise performance and is ideal for applications requiring accurate frequency signals. The oscillator can be programmed to output different frequencies, making it suitable for a variety of applications. In addition, the unit is built with a frequency range of 150MHz, which is suitable for most applications. Additionally, the device is quiet and efficient, which makes it ideal for RF applications.

Conclusion

The 535AB000335DGR oscillator is a highly accurate, low-jitter, and low-noise oscillator used in a variety of electronic applications. It is suitable for RF applications with a frequency range of 150MHz and can be programmed to output different frequencies. Its high accuracy, low noise, and efficiency make it an ideal choice for a variety of applications.