535FC212M500DG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are pulse-generating electronic components within a circuit that produce periodic, oscillating electrical signals. They commonly consist of an amplifying device that can be a transistor or a FET, a frequency-determining element, and an output circuit. This output signal can be a sine wave as well as square waves, often in the form of a voltage waveform, representing a periodic oscillation in a circuit. The most important application for oscillators is in the area of communication. An oscillator is used whenever a signal needs to be produced with a particular frequency.

535FC212M500DG Application Field and Working Principle

The 535FC212M500DG from Microchip is a fast turn-on, modified sine wave oscillator. This device is used to produce output voltages with very low output frequencies ranging from 0.1KHz to 4.0KHz. It is possible to use pulse width modulation to get an output frequency of up to 8.2KHz. The 535FC212M500DG has a frequency accuracy of ± 25ppm and a low phase-jitter of 1.5ns. Due to its low power consumption, low EMI, and its small size, the 535FC212M500DG is a great choice for battery operated applications.

The 535FC212M500DG can be used for timing circuits, low frequency switching and activity, microprocessor- or microcontroller-controlled digital systems, or clock sources. It has the capability to generate an output voltage waveform with an accuracy of up to ±25 ppm and a low jitter of 1.5 ns. The 535FC212M500DG also has very low power consumption of 0.05mA when supplied with a 4.5V supply. It features a power-up enable circuit which can be toggled to run the oscillator in either the enabled or disabled state.

The working principle of the 535FC212M500DG oscillator is based on a frequency response solution for a differential voltage amplifier. The device includes an oscillator circuit consisting of one capacitor and two resistors. An external clock signal is fed into the feedback comparator stage, which is formed by a CMOS inverter, providing a stable, high-accurate oscillator. The capacitor and one resistor connected to the inverter define the oscillation frequency of the device. The 535FC212M500DG also has an enable pin to control the operation mode of the oscillator. The enable pin is used to control when the oscillator is in the enabled or disabled state.

The 535FC212M500DG is a versatile and reliable oscillator device with many potential applications in a variety of industries. The low power consumption and high accuracy makes it a great choice for any low frequency oscillator application. The device can provide stable, reliable, and accurate output frequencies with a low phase-jitter and is a great choice for any application where a low frequency output signal is needed.

The specific data is subject to PDF, and the above content is for reference