536EB000305DG

Absolute Pull Range (APR):	--
Current - Supply (Disable) (Max):	75mA
Height - Seated (Max):	0.071" (1.80mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	121mA
Operating Temperature:	-40°C ~ 85°C
Series:	Si536
Frequency Stability:	±20ppm
Voltage - Supply:	2.5V
Output:	LVPECL
Function:	Enable/Disable
Frequency:	156.2578MHz
Type:	XO (Standard)
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are specialized in producing the sinus waves with different frequencies. One of them is the 536EB000305DG oscillator which is widely applied in many application cases.

536EB000305DG Application Field

The 536EB000305DG oscillator has many application cases. It is used in low frequency signal requiring EM applications such as smart inverters, soft starters, motor controls and UPS. As one of its main characteristics is that it has a wide frequency range, up to 35MHz, hence it is much more flexible for the particular application cases. It is also used in telecom, industrial control and other applications that need the low frequency signal.

536EB000305DG Working Principle

The 536EB000305DG oscillator is a type of multi-pole atomic force controlled oscillator, meaning that it is comprised of the primary oscillator and the secondary oscillator, both are kept in balance by a controller. The primary oscillator contains a rotor and a stator. The rotor contains a small magnet in the middle, which is superimposed on a coil. The coil is connected to the stator, and the two coils are connected to the controller, which is responsible for providing the proper feedback signals for the oscillator to maintain the stability in the system.The output of the 536EB000305DG oscillator for low frequency signals is usually sinusoidal, as the oscillator is designed to operate in the range of 0-35MHz. In this range, the output of the signal is almost sinusoidal, thus it is suitable for most low-frequency applications.

536EB000305DG Frequency Stability

One of the key characteristics for the 536EB000305DG is that it has a very good frequency stability, so it is widely used in a variety of applications, as mentioned in the previous section. This stability is because the primary and secondary oscillators are designed in such a way that the difference in the frequency is much lower than the frequency itself. Additionally, the frequency of the sinusoidal is very accurate, as the frequency of the signal is regulated by the controller and the rotor and stator. This stability allows the 536EB000305DG oscillator to be used in applications such as Soft starters, motor controls and smart inverters, as well as in telecom, industrial control and other applications.

Conclusion

The 536EB000305DG oscillator is one of the most widely used oscillators for low frequency signals applications. It is able to provide stable and accurate sinusoidal outputs, even in the 0-35MHz frequency range. Additionally, this oscillator offers great frequency stability, which is very important for the particular application cases, such as smart inverters, soft starters, motor controllers and industrial control. From the above discussion, it can be seen that the 536EB000305DG oscillator is a great choice for many application cases.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description